Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 9 of 9
    1. #1
      Join Date
      Jun 2007
      Location
      Fort Myers, FL
      Posts
      1,003

      Pontiac 350 Cooling Issues

      OK so i finally get to the point where i finished putting back together the engine and well i fill up all the fluids and my radiator and water pump both leak....Not like little leaks but like waterfalls persay. SO needless to say I need to upgrade.

      I am wondering what my options are at this point any help on this would be greatly appreciated. I would like to keep the cost low but i am doing another 350 build later on so i would like the radiator and water pump to be able to tranfer over and be able to handle the added horsepower.

      The motor is out of a 1973 firebird and the car is a 1967 Firebird.

      Any help would be greatly appreciated.

      Chris Smock aka Blazed67
      1967 Firebird Convertible- Tough Luck- never ending
      2003 VW Jetta Wagon 1.8T- the new DD
      2006 Suzuki SV1000R- greatly missed


    2. #2
      Join Date
      Aug 2004
      Posts
      609
      If you want to go the route of a complete Mark VIII drop-in assembly with radiator, fan & controller, I can set you up for around 700 bucks, thats about as cheap as I can go, plus add for shipping. Pm me if you are interested.
      Gmachinz Sales and Performance
      "updating the level of performance..."

      [email protected]
      *never argue with an idiot-they'll drag you down to their level and beat you with experience!*

    3. #3
      Join Date
      Mar 2007
      Location
      Florida
      Posts
      2,391
      Country Flag: United States
      These guys have a nice water pump. After lots of research on Pontiac water pumps and water pump mods a few years ago I went with one of theirs when I installed the 400 I'm using now. Very nice piece and no problems using for street, road course,drags, and top speed events.

      http://flowkooler.com/home.php

    4. #4
      Join Date
      Dec 2006
      Location
      Los Angeles
      Posts
      334
      Go to the Performance Years website, and look at the forums.

      There is a thread that is at least 30 pages (it's been awhile since I looked).

      A 350 with a good working radiator, good pump, good plate, should not have any problems assuming the engine is fine and tuned properly. That is once you get the leaks fixed.

      It's only when you get to the 455's you start taxing the cooling system, but that can be fixed as well.

      You don't need an electric, if you don't want one. I've been where you are as far as trying to cool the beast. I have a relatively small cross-section radiator due to the design, but I have a factory style 4-row radiator, and what I have found that works the best is a good thermal-clutch and fan, and make sure you have a good shroud, properly fitted...these two are critical if you are having issues (again, after the leaks are fixed).

      Personally, I am going to put in a Taurus fan, though I have yet to buy a controller. Not because of overheating but more control over temps (for drag racing) and I like some of the features...plus my goal is to get 20+ mpg on pump gas, N/A, and run high 11's with a Pontiac engine (and under budget, which is the tough part, especially since I have no time anymore to do anything).

      Good luck.

    5. #5
      Join Date
      Jun 2007
      Location
      Fort Myers, FL
      Posts
      1,003
      Well i got a stock water pump and new 2 row aluminum radiator. Now i either need to get a shroud or an electric fan. I'm really tempted to get the mark VIII fan but the 100a pull at start up worries me but i know it will be able to keep up with whatever i need it too. Decisions decisions.
      Chris Smock aka Blazed67
      1967 Firebird Convertible- Tough Luck- never ending
      2003 VW Jetta Wagon 1.8T- the new DD
      2006 Suzuki SV1000R- greatly missed

    6. #6
      Join Date
      Aug 2004
      Location
      north central Iowa
      Posts
      503
      Country Flag: United States
      Quote Originally Posted by Blazed67
      Well i got a stock water pump and new 2 row aluminum radiator. Now i either need to get a shroud or an electric fan. I'm really tempted to get the mark VIII fan but the 100a pull at start up worries me but i know it will be able to keep up with whatever i need it too. Decisions decisions.
      use a dccontrol controller, it soft starts the fan instead of just kicking it on to full speed, and maintains a constant temp instead of the fan kicking on/off with relays
      72 Nova SS, on the back burner for now.


      current cruiser: "The green machine"

      '70 Impala 4drht, 26K original miles, 2" drop springs and large swaybars, drives pretty good for a land yahct in the middle of an ls1 swap, but thinking about changing directions to a duramax diesel swap.

    7. #7
      Join Date
      Dec 2006
      Location
      Los Angeles
      Posts
      334
      Quote Originally Posted by justanova
      use a dccontrol controller, it soft starts the fan instead of just kicking it on to full speed, and maintains a constant temp instead of the fan kicking on/off with relays
      Sure, how do you actually get one? I tried calling at least 10 times (probably 15+, as I get pretty determined), and sent 3 emails, and never once was able to get someone to answer or respond.

      They (the controllers) seem really good, but what gives?

    8. #8
      Join Date
      Aug 2004
      Location
      north central Iowa
      Posts
      503
      Country Flag: United States
      Quote Originally Posted by Karch
      Sure, how do you actually get one? I tried calling at least 10 times (probably 15+, as I get pretty determined), and sent 3 emails, and never once was able to get someone to answer or respond.

      They (the controllers) seem really good, but what gives?
      I know he gets really busy sometimes, but I had ordered a fan/controller for my dads car about 1.5months ago and it showed up about 4weeks after the order. I just went to the website, and ordered online with a credit card, you can use paypal as well.
      72 Nova SS, on the back burner for now.


      current cruiser: "The green machine"

      '70 Impala 4drht, 26K original miles, 2" drop springs and large swaybars, drives pretty good for a land yahct in the middle of an ls1 swap, but thinking about changing directions to a duramax diesel swap.

    9. #9
      Join Date
      Aug 2004
      Location
      Houston, Tx
      Posts
      218
      Country Flag: United States
      I have a .060 over 455 hardblocked to the bottom of the water pump holes that NEVER runs over 185....even in 100 degree Tx heat!

      I'm running a universal AFCO aluminum radiator and a pair of electric fans off a 96 Vette. Ls1 fans would work, too. The shroud fits well with minor trimming to get the fans close to the back of the radiator and to clear the radiator hoses. I'm suing the stainless flex hoses with the big polished ends. Fans are wired to only run with the ignition is on and controlled with a Hayden thermostat switch. I'm running an aluminum pump, but it's not the flow cooler. Make sure the clearance between the divider plate and the pump is less than .060 and the sleeves are in the timing cover.
      Drew H.




    Advertise on Pro-Touring.com