Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 10 of 10

    Hybrid View

    1. #1
      Join Date
      Dec 2005
      Posts
      161
      Very nice. thanks for the pics. Since you're running a standard block, what are you doing for dizzy clearence? I'm thinking it would be easier to do that from that back.. IE like a van but are you leaving enough room to do it from the from? It looks like you have lots of hight there to play with..



      I was only hoping to move myself back about 4 inches...
      The Gutless Cutlass, is no more.
      '73 Chevy C10, Low with lots of GO!!!!


    2. #2
      Join Date
      Sep 2004
      Location
      PA.
      Posts
      935
      Country Flag: United States
      Moving the motor and trans back isn`t all that hard. Doing it so you can still sit in the car and work the gas pedal is harder. Unless your right leg is 6" shorter than the left,then disregard this.

      G body is VERY hard to properly mount a conventional R&P in. There`s some very serious fab work involved including remounting the lower control arms. Do a search here. I think you`ll find it a LOT more work than it`s worth for potentially poor results. There are many more people out there with welders than their are who know how to properly engineer a steering system...
      Mark SC&C

    3. #3
      Join Date
      Aug 2003
      Location
      Southern Louisiana
      Posts
      377
      The plan is a front mount dist off the belt drive for the cam.

      One leg 6" shorter would have made it much easier. Thanks Mark.

      Kevin




    Advertise on Pro-Touring.com