Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 6 of 6
    1. #1
      Join Date
      Mar 2008
      Location
      Oklahoma
      Posts
      58

      Ring and Pinion Posi Unit Ford Nine Inch?

      OK, im needing to get a pumpkin for a ford nine inch with 31 spline axels. My question is what posi units out there will serve me best? My car is pretty much a daily driver. 330-350 horse, some where in there, LT1 Chevy pushing a 4L60E in a 68 Camaro. My car will make the occasional trip to the drag strip, but pretty much just a down the road and back cruiser. I have been looking and they all seem about the same, and some look like a little overkill for my needs. Track Lock, Auburn gear, Detroit Locker. Are any one better than the other. From just the advertisements, and advertisements only, I was leaning towards the Auburn gear.

      Ring Gear and Pinion, what brand have yall had the best luck with. Im wanting to have as quiet rolling car as possible if you know what I mean. I dont want the rear end hummm if I can keep away from it. Yukon, Strange,Richmond, what?

      Thanks for your help



    2. #2
      Join Date
      Feb 2008
      Location
      Denver NC
      Posts
      288
      Country Flag: United States
      Tru trac with motive's

    3. #3
      Join Date
      Dec 2002
      Location
      Lost Wages, Nevada
      Posts
      2,684
      Country Flag: United States
      As for the differential... and as long as you dont do too much drag racing or run slicks... the True Trac. Second choice would be a billet side cover Track Lock. The True Trac will not live with too much impact loading (drag racing) especially if you use slick or hook up really really good. But at your power level and the majority of your intended use... I think you will be just fine.

      Now... as for the gearing. Out of the 10,000+ or so differentials that I have built, I will have to say the best gears I have used for a 9" are those from Visteon and USGear... with Motive somewhere in third.

    4. #4
      Join Date
      Aug 2004
      Posts
      362
      Agree with the US gear Trac Loc with billet hat.

    5. #5
      Join Date
      Mar 2008
      Location
      Oklahoma
      Posts
      58
      Thanks for the advise... just what I was looking for.

    6. #6
      Join Date
      Feb 2008
      Location
      Denver NC
      Posts
      288
      Country Flag: United States
      Quote Originally Posted by chicane67
      As for the differential... and as long as you dont do too much drag racing or run slicks... the True Trac. Second choice would be a billet side cover Track Lock. The True Trac will not live with too much impact loading (drag racing) especially if you use slick or hook up really really good. But at your power level and the majority of your intended use... I think you will be just fine.

      Now... as for the gearing. Out of the 10,000+ or so differentials that I have built, I will have to say the best gears I have used for a 9" are those from Visteon and USGear... with Motive somewhere in third.
      I would of said Visteon but dont know his budget.... or X Trac....




    Advertise on Pro-Touring.com