Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 10 of 10

    Hybrid View

    1. #1
      Join Date
      Sep 2006
      Location
      Chicago
      Posts
      355
      Country Flag: United States
      Just a tip. When your changing your turn signal switch disconnect the connector at the bottom of your colum then go to the top and cut the actual switch off the harness and use one of the old wires from the old harness to pull the new harness through. Seperate one of the wires that are molded together on the old harness strip it back and slide it through one of the empty holes on the new harness connector then with one hand lightly pull on the old harness at the bottom of the colum and with the other push the new harness through the top. Hope this helps. If it snags on something, which they usually do use a long welding rod and a flashlight to guide it through the snag.






    Advertise on Pro-Touring.com