buffing time

[hotrdblder]

i usually never cut base down, i usually apply my coats of base 2-4, then go around and nib dust in the base once nib'd i will re apply some base in those areas, then i go on to clear, no i do not cut clear in between coats.
i apply 2-3 coats let cure, sand flat and buff or if theres 2 tone or stripes etc i clear again 2 coats and sand and buff, it burys everything, so theres no tape lines etc.
basecoat should be applied so that it flashes before much dirt etc can get in it.
i usually do not go more then 3 coats of clear anytime, but i use standox and 3 coats of my clear is like 5 of duponts or other americanmade clears