Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 16 of 16

    Threaded View

    1. #1
      Join Date
      Jul 2007
      Location
      Austin, TX
      Posts
      48
      Country Flag: United States

      dry sump update and question

      I just moved my dry symp oil tank and placed my water header tank and catch cans for both. Took a lot of thought to position them in the best spot and plan the bulkhead (which I'll make out of aluminum later), but I'm happy now.

      To be honest, this is the second attempt, I had to cut the brackets off the chassis and move them after my first attempt where I didn't remember the rocker covers were on studs and needed some room to remove..




      So, my question is regarding the problem where the dry sump tank will potentially drain down into the engine overnight and you can hydraulic the engine. I planned to add a valve in the return line and use a cable in the dash to shut it off. An ignition cut-off switch would be next to the valve so that I couldnt start the engine when the oil is shut-off.

      That was the plan, but I heard the other day that some motorbikes had dry sumps and to prevent drain-down they had a spring-loaded inline valve that opened when run (presumably closed until the pump generates 5psi or whatever) ..anyone heard of an automatic solution like this?

      James





    Advertise on Pro-Touring.com