Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 18 of 18
    1. #1
      Join Date
      Jan 2005
      Posts
      11

      DSE 3" drop leaf spring

      I am looking for a picture of a 67 or 68 camaro with DSE 3" lowered rear leaf springs......Does anyone know if I run these springs with a 17" wheel will the top of the rim be even with the wheel well opening?



    2. #2
      Join Date
      Oct 2003
      Location
      Arvada, Co
      Posts
      2,119
      Country Flag: United States
      Tanner, no it will not. The reason that it looks that way on a 69 is because the top of the wheel opening on the 69 is leveled off. The 67-8 is more rounded. You can get it there with lowering blocks, but then you will not have enough bump travel.

      Brian

    3. #3
      Join Date
      Nov 2003
      Location
      Maine
      Posts
      1,076

      67-68

      brian is right on, however as long as the tire is above the 1/4 lip, the car will look real nice, thats about as low as you want to go on a 67-68, 18 rim will help a bit as it will get rim lip closer to 1/4 lip
      jake

    4. #4
      Join Date
      Jan 2005
      Posts
      11
      Thanks for the info ........

    5. #5
      Join Date
      Aug 2004
      Location
      El Dorado Hills, CA
      Posts
      789
      Country Flag: United States
      Tanner I am running 18s on my 68, let me know if you want to see some pics of it.
      Brad
      68 Camaro - Procharged LQ4 coming - Currie 9" narrowed, bagged, lays frame, BMW projector HID's LED tails, 18"s, lexus center console, seat warmers, A/C... Mini-tubbing in progress!!

      07 BMW 750li -loaded

    6. #6
      Join Date
      Aug 2004
      Location
      Jackson, MI
      Posts
      86
      Country Flag: United States
      Here's my 67' with 3" DSE drop springs, 17" X 10" wheels and 275/40R17 BFG's. The front looks good with 17's but I wish I would have put 18's on the back.

    7. #7
      Join Date
      Aug 2004
      Location
      Oshawa ON
      Posts
      58
      Country Flag: Canada

      DSE 2" vs 3" vs Hotchkis 1.5"

      I am buuilding a 69 Firebird.

      The front has hotchkis 1907F springs. I dont know what leafs to put on the rear to get the perfect stance.

      The front wheels will be 17" and I was planning on 17" on the rear as well.

      Does any one have pics of a 69 F-body with the above springs?

      Thanks

    8. #8
      Join Date
      Jan 2005
      Posts
      11
      The camaro looks cool...the look I am going for is more like this..sorry for the crude cut and paste
      Attached Images Attached Images  

    9. #9
      Join Date
      Aug 2004
      Posts
      341
      If you want to go that low you might try looking in to bags
      Stuart Seitz

    10. #10
      Join Date
      Nov 2003
      Location
      Maine
      Posts
      1,076

      not gonna happen

      that is way to low and you will have NO suspension travel at all, would be unsafe to drive, it will have to be air bagged or channeled like muscle rodz is doing, you can get a 18 so the rim is just below the 1/4 lip and tire is above it, but thats it, not like a 69, there enough guys on here to check cars out just get some rocker heights from guys with a nice stance and match it, someone should chime in with some heights, the key oin the front is to not have the center of the lower ball joint lower than the lower control arm mount bolt, good luck
      jake

    11. #11
      Join Date
      Apr 2001
      Location
      La La Land, CA
      Posts
      2,241
      Country Flag: United States
      Here is a 68 with DSE 3" dropped springs, and 17's on the rear.

      The car has nothing in it, so I expect it will drop another 2" or so after final assembly.



      Tyler

    12. #12
      Join Date
      Nov 2003
      Location
      Maine
      Posts
      1,076

      tyler

      nice pic, kinda hard to see tire/1/4 lip clearance, will the tire be above the 1/4 lip, when settled?? or close, what are your thoughts on 17's vs 18's on 67-68's?? i am flopping between the 2 and have yet to see a 68 with a killer stance, other than steilows red camaro with zr-1 wheels on it, here is a pic.
      jake
      Attached Images Attached Images  

    13. #13
      Join Date
      Aug 2004
      Location
      NY
      Posts
      1,070
      I would think Mark's Camaro might rub under hard cornering? I have 68 Bird that I just started and am in same boat. Problem is if you check your outer wheelhouse it bulges out towards tire. It is hard to lower car without running into clearance issue. That is whay you see cars higher up in the rear. With 2 inches of travel you need some sort of clearance. Problem is everybody wants slammed air bag look. Even if you remedied wheelhouse you would need 4 bar or other non stock leaf suspension to get that look. The 18's do give more of a hidden tire look. A lot of guys here claim they are fitting huge tires but I would have to see the car perform in real world situation before I believe it. Honestly with correct backspacing a 255 with the car lowered to just at sidewall is about what will fit and that is what I would consider tight.

    14. #14
      Join Date
      Jan 2003
      Location
      Arizona
      Posts
      5,394
      Country Flag: United States
      Here ya go. DSE 3" springs, no lowering blocks, 285/35x18 tire.
      This is as low as it goes and even at this level you should expect to rethink exhaust and shocks.
      The Red Witch had custom leafs that were de-arched, test-fitted, de-arched some more, test-fitted...You get the idea. Trust me. Unless you want to channel the body over the frame like MuscleRodz is doing, DSE 3" leafs are as low as you want to go. And they work great!




      Here's some homework on the subject:

      DSE 2" to 3" Leaf Spring Comparison
      Last edited by Steve Chryssos; 04-19-2005 at 03:34 AM.
      ________________
      Steve Chryssos

    15. #15
      Join Date
      Aug 2004
      Location
      NY
      Posts
      1,070
      Steve that car has nice stance. Do you have any wheel lip rub at full travel? Rim size and backspace. Problem is I am so used to building lowered car that when I mocked up tire it just looks odd but in your pic the car looks right. Are those rear vents operational? They look killer.

    16. #16
      Join Date
      Oct 2002
      Location
      Houston,TX
      Posts
      630
      Steve, I tried the link and not a working. at least for me.
      James J.

    17. #17
      Join Date
      Oct 2003
      Location
      Arvada, Co
      Posts
      2,119
      Country Flag: United States
      Like I said earlier you would not have enough bump travel. It looks like Steevos car and the Red Witch have the same stance. That is about as low as you can go on a 67-8 and still have a functional suspension. The outer wheelhouse is an issue, but you also have problems with axle housing to frame rail clearance. To even have a chance on getting that look is to channel the chassis. However, you only have so much room to modify the outer wheelhouse before you need to flare the 1/4s. How much time and money do you want to throw at it? Sorry, but that look is not in the cards for a 67-8 Camaro.

      Brian

    18. #18
      Join Date
      Nov 2003
      Location
      Maine
      Posts
      1,076

      right on

      baz is right on, i have a 68 myself and am looking for the steilows stance, looks to me a bit lower than steevo's although could be tire some also, i got mine mini tubbed and am gonna run 335's gonna have plenty of room to tuck up in the middle but the front and back of the wheel house is where the tire will not fit, along with not alot of room in the outer wheel house, i think steilow ran 315's on the red witch, man that car is awesome
      jake




    Advertise on Pro-Touring.com