new tool

[rubadub]

And it works really slick, doubles the life of these discs. Anyway, for what its worth.

http://www.1969supersport.com/tls.html

Rob

[toxicz28]

Why not just cut the rubber off of the roloc holder?

[rubadub]

You can't because of the way its made and the metal in it, it will break apart. Good question though.

Rob

[MonzaRacer]

strange my roloc tool had had the rubber worn off for quite a while and still works.

[cheapta]

You could also get a smaller dia.Roloc holder-I have 2" and 3".

[rubadub]

You could also get a smaller dia.Roloc holder-I have 2" and 3".

This is true and those 2'' are handy also.

I just went out and measured the one I use, and its 3/4'' in diameter.

Lately I have been using it along the floor support seam, it varies from 5/8'' to over an inch wide, and the smaller tool allows me to see what I'm doing a little better.

I know when I get done with one of these discs, theres very little waste.

Rob