Results 1 to 4 of 4
-
01-15-2008 #1
Registered User
- Join Date
- Jul 2005
- Posts
- 5
Taillight Panel question , please help!!!!
Long time lurker here , and I have learned quite a bit. I am truely amazed at the artistry that so many of you have applied to your projects. My question is can a taillight panel from a 73 Camaro be adapted to fit a 74 Camaro without much fuss?
-
01-15-2008 #2
Registered User
- Join Date
- Mar 2004
- Location
- Mid-Michigan
- Posts
- 2,764
I am just speculating here with my knowledge of the 2nd gen Firebirds.
I really doubt it. The 74 model year is the first year for the endura bumpers AND the full size (non-round) tail lights. I think you will see too many differences to make this a reasonable swap. I know the same year firebirds are totally different...
Mark
Mark:
"Bad Ast" Astro Van. Just because I did it... Doesn't mean it's possible...
This my Bad Ast thread...
https://www.pro-touring.com/showthre...roject-Faze-II
This is my Fotki album...
http://astroracer.fotki.com/
-
01-16-2008 #3
Rat Pack Member
- Join Date
- Aug 2002
- Location
- Waleska Ga.
- Posts
- 2,722
You would have to change the rear of the quarter panels or both quarter panels.
I think the trunk pan may be different as well.
Lots of work!David Sloan
If you’re suggesting sending men with weapons of war to take my weapons of war,then I’m fairly certain that’s what’s called an act of war… and the definition of tyranny.which coincidentally is the reason for the second amendment to begin with!
https://www.pro-touring.com/showthre...ght=fun+camaro
https://www.pro-touring.com/threads/...lcamino-build!
01-17-2008 #4
Registered User
- Join Date
- Jul 2005
- Posts
- 5
Oh well , I guess I have some rethinking to do , but I do appreciate
your suggestions.
Reply With Quote
