Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 10 of 10

    Hybrid View

    1. #1
      Join Date
      Jul 2006
      Location
      Maitland, Florida
      Posts
      31

      New Project 72 F body!

      I have never done a ProTouring car; so this will all be new to me. Any pointers on where I should start?



    2. #2
      Join Date
      Dec 2005
      Location
      Dublin, CA
      Posts
      502
      What are you starting with? Some pics would be good and some idea of what you are looking to do with the car (i.e. show, daily driver, autocross, etc...)
      Brent

      1971 Camaro, LT1, 4L60E

    3. #3
      Join Date
      Jul 2006
      Location
      Maitland, Florida
      Posts
      31

      72 F Body

      It is still sitting in the trailer, but I should have some pics to post this weekend. I am looking to make it into a weekend around town car. Right now it sits as a shell on a body cart with the frame conncetors welded and attached to sub frame. Sub-frame has been blasted and refinshed along with all new tie rods, ball joints, bushings etc....

    4. #4
      Join Date
      May 2006
      Location
      Northern NJ
      Posts
      216
      Camaro or Firebird?
      1974 Pontiac Firebird Formula
      1971 Pontiac Firebird Formula Clone
      1973 Chevrolet Camaro

    5. #5
      Join Date
      Jul 2006
      Location
      Maitland, Florida
      Posts
      31
      1972 Camaro. Got it out of the trailer today and it is sitting pretty in the garage. Where to start? Most likely with photos in the morning.

    6. #6
      Join Date
      Oct 2004
      Location
      St.Anne Il
      Posts
      3,924
      Country Flag: United States
      welcome i picked up a pretty nice 73 this summer..the 2nd gens are getting hottttt
      Darrin Stalnecker
      1969 Camaro Convert full pt pr
      2007 Corvette Supercharged
      1968 Camaro LS1 T56
      http://www.fquick.com/dropit69

    7. #7
      Join Date
      Jul 2006
      Location
      Maitland, Florida
      Posts
      31
      I have been looking for a while and found one in Texas. Man, fuel is expensive! I think it may have been cheaper to have it shipped.

    8. #8
      Join Date
      Aug 2004
      Location
      Atoka, TN
      Posts
      131
      Any pics yet?

    9. #9
      Join Date
      Jul 2006
      Location
      Maitland, Florida
      Posts
      31

      One Pic finally up loaded.......

      Still trying to get my computer fixed... Here is one picture I was able to salvage out of the computer vs 12 year old ordeal. Anyway... I hope to have more up soon. What type of rear-ends will work in this application? Keep in mind that it has been back halfed and there are no mounting points as of this moment. Does any one know if the DSE will work without the factory rear chasis mounting points?
      Attached Images Attached Images  

    10. #10
      Join Date
      Jul 2007
      Location
      Tracy, CA.
      Posts
      1,347
      Welcome to the board! I would start with the suspension myself, brakes, control arms, steering components rear end etc.... how much are lookingto spend on this project? it will add up quick depending on what you want it to be in the end. It's an addiction!!!
      Steve Martin
      67 Camaro RS
      66 Chevelle




    Advertise on Pro-Touring.com