Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 7 of 7
    1. #1
      Join Date
      Dec 2006
      Location
      Arlington Heights, IL
      Posts
      791

      Wideband 02's on my big block.

      Ive got 6 spots for 2 5/8 gauges and I was thinking id put in a air/fuel ratio gauge. ANd because it would help me tune my car better. My question is, what should I go with? and is it worth it to do this?

      thanks
      Jesse

      1969 Camaro under construction.
      1967 firebird. 6.0/t56. Ridetech stage 2. Moser 9 inch. Forgeline wheels.(SOLD)


    2. #2
      Join Date
      Feb 2007
      Posts
      164
      LM1 or pro logger set up. Yes it is as it will show you your A/F ratio right through a run. It will help you fine tune the carb and let you know of any potential problems. Unless you shut off immidiately you finish a run reading the plugs is a waste of time.

    3. #3
      Join Date
      Aug 2005
      Location
      Patterson, NY
      Posts
      784
      Sounds like a good idea to me. Make sure that you look at the true wideband setups, as some (like the old Edelbrock setup) are really narrowband. If it's too cheap it's probably narrowband.
      The Innovate products are nice. (LM-1 and LC-1) You'll probably want to get the LC-1 instead of the LM-1, since the LM-1 has a control box with a digital readout, so it's a little bulky, while the LC-1 has the controller built into the cable, and can be purchased in a kit with a gauge.

    4. #4
      Join Date
      Jan 2008
      Location
      Valdosta, Ga
      Posts
      10
      Zeitronix makes good widebands also

    5. #5
      Join Date
      Apr 2001
      Location
      The City of Fountains
      Posts
      16,130
      Country Flag: United States
      FJO makes the best widebands in my opinion.

      Andrew
      1970 GTO Version 3.0
      1967 Cougar build
      GM High-Tech Performance feature
      My YouTube Channel Please Subscribe!
      Instagram @dr__efi
      I deliver what EFI promises.
      Remote Holley EFI tuning.
      Please get in touch if I can be of service.

      "You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her

    6. #6
      Join Date
      Nov 2007
      Location
      Afton,Mn
      Posts
      181
      You'll probably want to get the LC-1 instead of the LM-1, since the LM-1 has a control box with a digital readout, so it's a little bulky, while the LC-1 has the controller built into the cable, and can be purchased in a kit with a gauge.
      The lc-1 doesn't have any datalogging. I currently use an LM-1 with the LMA-3.Gives 5 channels plus air-fuel.I don't use a guage-try to keep my eyes on the road instead.The XD-16 guage looks pretty slick though.

    7. #7
      Join Date
      Jul 2007
      Location
      Los Angeles, CA
      Posts
      1,303
      I went with Fast dual Wideband O2 sensors, it has a logging feature as well. It came with a large meter that I will probably put in the glove box, but Stewart Warner makes a nice 2-1/16 A/F gauge that I can hook up to the analog output from the Fast.

      http://store.summitracing.com/partde...5&autoview=sku

      That way I can have a small gauge to glance at when I am not actively tuning and I have all the features of the logger when I want, without the interior clutter.

      Fast Air Fuel Meter:
      http://www.compperformancegroupstore...AIRFUEL_METERS

      Summit has a good deal on them:
      http://store.summitracing.com/egnsea...20513&D=320513




    Advertise on Pro-Touring.com