Results 1 to 4 of 4
Thread: Hydroboost and racing
-
12-24-2007 #1
Registered User
- Join Date
- Oct 2007
- Posts
- 1,869
Hydroboost and racing
Hi I am building a Gen 1 Camaro that wil be used for street and will see some Targa, Auto cross and time attack races.
One I am setting my goals around is Targa Newfoundland.
I was just wondering if I should be concerned about foaming and heat.
Plan is a Lee box ATS spindles Gen 3 (small pump) and a hydroboost.
I have been thinking about remote resivours and plan on a inline cooler. Is anoyone out there using a Gen 3 pump and hydroboost that does any racing excluding Drag?)
Any help appreciated.
-
12-24-2007 #2
-Moderator/Sponsor-
- Join Date
- Jun 2001
- Location
- Newbury Park, CA
- Posts
- 5,837
Mine works with a P-pump, and if it will work with that, a TC or CB pump will have no problem, assuming similar reserviors, coolers, etc.
VaporWorx. We Give You Gas http://www.vaporworx.com
12-25-2007 #3
Registered User
- Join Date
- Oct 2007
- Posts
- 1,869
sorry TC or CB?
12-26-2007 #4
-Moderator/Sponsor-
- Join Date
- Jun 2001
- Location
- Newbury Park, CA
- Posts
- 5,837
The TC pump is what many consider to be the later model pumps, such as those sold by Turn One, AGR, etc. The CB pump is what is used on 4th gen cars. There's lots of info in the archives and at various supplier websites.
VaporWorx. We Give You Gas http://www.vaporworx.com
Reply With Quote
