Results 1 to 6 of 6
Thread: painting 3rd member
-
12-08-2007 #1
Registered User
- Join Date
- May 2007
- Location
- Midwest City, Ok
- Posts
- 306
painting 3rd member
I bought a assemblied 3rd member from moser for my 9", what would be the best paint to use on this? I was thinking about the duplicolor 1500* header paint. Would powder coating be to hot, since it is already assembled?
-
12-08-2007 #2
Registered User
- Join Date
- May 2000
- Posts
- 4,151
I don't see how heat could have an affect on it.
12-08-2007 #3
Registered User
- Join Date
- May 2007
- Location
- Midwest City, Ok
- Posts
- 306
Hmm... So should I just leave it bolted to the housing or take it apart and let them mask it off? Do I need to have the inside of the housing (pumpkin) blasted and powder coated?
12-08-2007 #4
-Moderator/Sponsor-
- Join Date
- Jun 2001
- Location
- Newbury Park, CA
- Posts
- 5,837
Don't powder coat an assembled housing. The rubber seals would not be happy.
If disassembly is not an option then painting is best. A high-temp paint is not necessary.VaporWorx. We Give You Gas http://www.vaporworx.com
12-08-2007 #5
Registered User
- Join Date
- May 2007
- Location
- Midwest City, Ok
- Posts
- 306
I will probably powder coat the housing and paint the third member then. Any ideas on rattle can paint for the third member?
Originally Posted by CarlC
12-08-2007 #6
Starting The Transformation
- Join Date
- Nov 2007
- Location
- Moore, Ok
- Posts
- 103
Chassis Black "DONT POWDER COAT IT" It will ruin the seals
Reply With Quote
