Results 1 to 2 of 2
Thread: t56 swap
Hybrid View
-
12-06-2007 #1
Registered User
- Join Date
- Jul 2006
- Location
- Mission, B.C., Canada
- Posts
- 40
t56 swap
I foound a t56 in the local rag that was built for a Ford kit car. The seller indicated to me that I just needed to change the bell housing to get this tranny to fit my 99 LS1 emgine. I would like to install this combo in my 67 camaro. Thanks for yout input.
RM
-
12-07-2007 #2
Registered User
- Join Date
- Aug 2004
- Location
- Walla Walla, WA
- Posts
- 1,512
Take a look here http://www.camaros.net/forums/showthread.php?t=98387 for some basic information on how to do the T56 swap into a Camaro, including some information on input shaft length. The short answer is the Ford T56 should bolt up to an LS1 or McLeod Modular bellhousing or the McLeod adapter kit. You may need to change input shafts, depending on what's in there. I'd find out what you have and go from there.
Mike Kelcy - '68 Camaro with some stuff done to it.
Reply With Quote
