Results 1 to 4 of 4
Thread: 67 Camaro
-
11-25-2007 #1
Registered User
- Join Date
- Jul 2006
- Location
- Mission, B.C., Canada
- Posts
- 40
67 Camaro
I can get a posi rear end out of 74 Camaro. Will it slide right into my 67?
-
11-25-2007 #2
Registered User
- Join Date
- Jan 2006
- Posts
- 1,747
I have read it is not a direct swap because the widths are different. A 68 to 73 Nova will work as a direct swap however (if that helps).
GeoffP
68 Camaro - LS1/T-56
11-25-2007 #3
Registered User
- Join Date
- Jul 2005
- Location
- Den Helder, the Netherlands
- Posts
- 1,148
The width of a second gen rearend is 1" wider in total, so .5" per side. I put a second gen posi rear end under my 67 but you have to cut of the orig. leaf spring pads and install adjustable leaf spring pads to make it work. http://www.detroitspeed.com/productp..._pads_prod.htm
After that it just requires selecting wheels with the proper offset.
11-26-2007 #4
-Moderator-
- Join Date
- Apr 2001
- Location
- Central CA USA
- Posts
- 6,114
Nova, Ventura, Omega 1970 - 1974 use the same width as first gen Camaro and are 8.5" ring gear differentials.
If you relocate the spring perches, the 74 Camaro rear will work but it will move the wheels out .5" per side.
DavidDavid Pozzi http://www.pozziracing.com67 Camaro RS that will be faster than anything Mary owns.
Reply With Quote
