Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 1 of 2 1 2 LastLast
    Results 1 to 20 of 33
    1. #1
      Join Date
      Oct 2007
      Location
      Lubbock, TX
      Posts
      384

      Looking for these Valve Covers...

      well, I'm looking for a good deal on them at least. lol Do any of you guys know where I can get them for less that $270?

      http://www.jegs.com/webapp/wcs/store...0002_279686_-1







    2. #2
      Join Date
      Jul 2007
      Location
      Tracy, CA.
      Posts
      1,347
      270 is a decent price, I paid over 300 for mine at a Chevy dealership.

    3. #3
      Join Date
      Sep 2004
      Posts
      25
      Superior Chevrolet has them for $267.19. I know it's only $2.81 savings. Back in the day, they use to offer Powder Coating on them. Not sure they do that anymore. I'm thinking Jegs or Summit are going to be the best deals. Will the short Valve Covers fit over Roller Rockers?

    4. #4
      Join Date
      Sep 2002
      Location
      San Jose, CA
      Posts
      1,793
      Those are GMHPP - and everyone basically sells them at cost... there is no better deal.
      1971 Camaro, 383 stroker ~500HP,M21 Trans with lightened flywheel. All Sorts of Auto-x Goodness in the Suspension. 12" Brakes ->SOLD

      But ask me about my 2004 STi Auto-x car...

      Just call me Brett

    5. #5
      Join Date
      Oct 2007
      Location
      Lubbock, TX
      Posts
      384
      Really? lol, well looks like I'm getting them from Jegs because they offer FREE shipping. So basically the $2.81 savings on the top price would just kill me over in the end with shipping, huh?

      Do you have pics of these on your cars or know of anyone who does? I'd like to see them on a car before I click that "buy now" button. lol Thanks BTW!!!

    6. #6
      Join Date
      Oct 2007
      Location
      Lubbock, TX
      Posts
      384
      Quote Originally Posted by 70GTZ28
      Superior Chevrolet has them for $267.19. I know it's only $2.81 savings. Back in the day, they use to offer Powder Coating on them. Not sure they do that anymore. I'm thinking Jegs or Summit are going to be the best deals. Will the short Valve Covers fit over Roller Rockers?
      I hope so, would these work with my set up?

      I have:
      Manley Street-Flo forged steel valves intake,1.600''exhaust, 11/32''x7 hardened steel locks.
      Hardened steel guideplates.
      Hardend Pushrods

      Im new to this!

    7. #7
      Join Date
      Dec 2002
      Location
      Lost Wages, Nevada
      Posts
      2,684
      Country Flag: United States
      $270 is crack. But then again... they are the scripted covers. I got my tall covers (which are the same), without the script, for $96.00 ea. at the local Pontiac dealership.

    8. #8
      Join Date
      May 2002
      Location
      Northern California
      Posts
      10,716
      Country Flag: United States
      ...but that was when AL was a lot cheaper. I bought a set when they where 105 each. Go with the tall set dude.
      MrQuick ΜΟΛ'ΩΝ ΛΑΒ'Ε


    9. #9
      Join Date
      Oct 2007
      Location
      Lubbock, TX
      Posts
      384
      Ok if go with the tall set, how hard is it to drill those holes for the PCV line?

    10. #10
      Join Date
      May 2005
      Posts
      386
      Country Flag: United States
      Not hard considering they are just aluminum.

    11. #11
      Join Date
      Jul 2007
      Location
      Tracy, CA.
      Posts
      1,347
      I took mine to the local race car builder and had him drill them. I was to nervous and wanted to make sure the holes were straight.

    12. #12
      Join Date
      Oct 2005
      Location
      New Washington, IN
      Posts
      1,509
      Those are great looking vc. I saw a set at a swap meet and the guy wanted $250 for them. I don't think you will ever find a 'deal' on them.
      1971 Camaro 427 in waiting
      1988 C1500 Daily Driver
      1955 Bel Air, blown BBC street car

    13. #13
      Join Date
      Oct 2007
      Location
      Lubbock, TX
      Posts
      384
      Yeha, I know. I've been looking left and right for them!

    14. #14
      Join Date
      Nov 2004
      Posts
      444
      Country Flag: Netherlands
      if you buy those, or the tall ones without the breather hole.... get a can or spraybomb of glyptal and coat the inside before you use them. Some of these sweat oil and it's a PITA to get it all out again and coat the inside afterwards.

      I've seen them on ebay from time to time, sometimes for little money. I paid almost 500$ for mine (including shipping and the tax nazis here) some 6 years or so ago. They are very nice covers, unfortunatly mine didn't fit. Still looking for a great deal on some low style ones


    15. #15
      Join Date
      Dec 2002
      Location
      Lost Wages, Nevada
      Posts
      2,684
      Country Flag: United States
      For my 310cid build, I used the B&B Performance, 3 x 1.375" Valve Cover Breather Tube's... (which I also got from CV Products) and two 62-1440 K&N slip on filters. We actually chucked the covers into a Bridgeport and used a Unit-Bit to cut the holes. Post that and after clearancing them for the Jesel shaft rocker system, I set the height and then welded them in from the back side.




    16. #16
      Join Date
      Sep 2004
      Posts
      23
      Country Flag: United States
      I'm running that same set (short) on my 69 Camaro. First off, the quality isn't what I expected for the price. I’d rate it as fair at best. As far as fit, I use Comp Cams roller rockers and these covers have a thick aluminum baffle under the hole that prevents you from bolting the cover on properly. I used thick valve cover gaskets, double gaskets and considered, but didn't use the aftermarket valve cover spacers/adapters. Anyway, the baffle looks like a box with the sides missing so I just removed it so it would work without hitting. Mine are the wide body rockers so the narrower type might work without contact. Some tailoring might work too but I just cut them out. They now fit fine with zero leaks around the gasket to head area. I had to swap several PCV and breather setups until I got a setup that didn't leak a lot. The drivers side breather still leaks (call it a weep) on long trips no matter what I try. To minimize the leak, I finally figured out that I need to put in a new (and tight) grommet every 3-4 months and make sure the breather/PCV is positioned as high (up) as possible and that it fits tightly (good grommet). If it goes down in the hole, it opens a leak path. I also put a cheap Fram fuel filter between the PCV and intake fitting to keep the oil out of the manifold and off the plugs. Without the baffle (and with the PCV and breather stuffed with oil resistant foam), it pulled small amounts of oil into the manifold. I painted the filter black and it tucks in behind the carb and is pretty much invisible to the casual observer. I have a Jegs setup that is supposed to do the same thing but I'm lazy and haven't installed it yet. I'll probably go to the breather system that was in one of the car magazines this month. Ditto on using Glyptal because one valve cover did sweat oil from around the script lettering area after a few months. They are hard to keep clean in the natural finish. When they are on the car, I use paper towels and a toothbrush with Brakecleen first and follow up with alcohol (be careful). Off the car use an acid based Mag Wheel cleaner to get them back to natural aluminum color. In my opinion, they look great (when clean) and are worth the trouble. I'm putting the same set on my 67 Camaro and Jegs/Summit are the cheapest I've found when you factor in shipping. Hope my pain helps avoid some on your end.

    17. #17
      Join Date
      Oct 2007
      Location
      Lubbock, TX
      Posts
      384
      Thanks for the heads up guys. I'm thinking twice now. Might have to go with some fabbed up ones instead.

    18. #18
      Join Date
      Dec 2004
      Location
      boerne texas
      Posts
      314
      i have a set all ready to go . if you need them.
      rickk

    19. #19
      Join Date
      Nov 2004
      Posts
      444
      Country Flag: Netherlands
      short or tall?? If short, I'm interested

    20. #20
      Join Date
      Oct 2007
      Location
      Lubbock, TX
      Posts
      384
      Quote Originally Posted by rickk
      i have a set all ready to go . if you need them.
      rickk
      Yes I'm very interested. How much? You can PM me if you want. I would really love a pair.

      Thanks.

    Page 1 of 2 1 2 LastLast



    Advertise on Pro-Touring.com