Results 1 to 7 of 7
Thread: A little help, would help
-
01-12-2005 #1
Registered User
- Join Date
- Jan 2005
- Location
- Trois Rivieres, Quebec, Canada
- Posts
- 3
A little help, would help
I am building a " G " machine on a foundation that consists of a 63 Corvette split window coupe, and need help in choosing the wheel size and spacing. I do not want to re-invent the wheel ( no pun intended ), and that is the reason for this first newbie post of mine. in the hope's that someone else has gone through this process before me, with the same model year of vehicle. I am using the complete " Performance Plus # 42000 " suspension system from Vette Brakes, including the off-set rear control arms, and have chosen a set of wheels from " Chip Foose ", but as it stands now, I have no idea what so ever, the maximum size that can be used. I am thinking of installing something around 17 to 18 inches, but no mods to the frame, or wheelwells is to be considered. Any help will be greatly appreaciated.
Last edited by stepinwolf; 01-12-2005 at 01:50 PM. Reason: error in size
-
01-12-2005 #2
Registered User
- Join Date
- Aug 2004
- Location
- CT
- Posts
- 823
I wont be any help bec. Im not familiar w/ Corvettes.
But I did notice that in our fitment chart that we have a listing for a 62 and a 69 Vette.
Maybe the guys listed could offer some help, try to PM them.
-
01-12-2005 #3
Pro-Touring Veteran
- Join Date
- Aug 2004
- Location
- NY
- Posts
- 1,070
Be careful as they have fitment problems with the calipers.
-
01-12-2005 #4
Registered User
- Join Date
- Mar 2004
- Location
- Mid-Michigan
- Posts
- 2,764
Check out a couple of wheel sites. Fiske has a nice worksheet to help you with tire/wheel fitment.
When I developed the wheels for my Astro project I worked closely with Bonspeed. Here is a couple of work sheets I did to verify the wheels I ordered would fit...
Of course these are for the front but all of the measurements apply to back as well...
MarkMark:
"Bad Ast" Astro Van. Just because I did it... Doesn't mean it's possible...
This my Bad Ast thread...
https://www.pro-touring.com/showthre...roject-Faze-II
This is my Fotki album...
http://astroracer.fotki.com/
01-12-2005 #5
Registered User
- Join Date
- Nov 2002
- Location
- Georgetown,TX
- Posts
- 2,557
Even with the offset control arms,a 10" wheel is about the limit on a MidYear. You might try the C2 Forum over at the Corvette Forum for more information.
01-12-2005 #6
-Moderator-
- Join Date
- Mar 2002
- Location
- Redwood City, CA
- Posts
- 1,895,413,640
I'd think that Vette Brakes might know as well. It's worth a shot.
Allen Ortega
Meanstreets Performance Fabrication
---------------------------------------
Vegetarians are the reason for global warming
01-13-2005 #7
Registered User
- Join Date
- Jan 2005
- Location
- Trois Rivieres, Quebec, Canada
- Posts
- 3
The only help I was able to obtain from Vette Brakes was that, and I quote " you should be able to use 10 inch rims on the rear " unquote. I don't mean any dis-respect but that much I had already figured out, and that's is why I bought them in the first place. As far as the 62 and 69 mentioned previously, sadely they just happen to be at each end of the platform, so all the suspension and body panels are completely different. I have not heard about " fiske " but I would appreaciate the address to the C2 forum that USAZR1 mentioned.
Thank's to all who have taken the time to read my post, and address my concernes
Reply With Quote
