Serp Pulley setup for Procharger Motor

[thedugan]

Need to order my pulley setup in the morning. Looking at the various March setups.

Any recommendations on what serp setup to use with a D1SC procharger. I only have to turn the crank, water pump, and alternator. No AC or power steering.

[69Bbird]

Procharger has came out with a serp system for a sbc not sure what your runnig? Look on their web site for more info.

[ProdigyCustoms]

Look at the ProCharger. It is a great value. if you do not like that, then we have something with march, but it is 3 times as much money. let me know

[thedugan]

Frank, thats fine. Can they ship the pulley kit with the supercharger? You can apply the lifter credit to the pulley kit.

[thedugan]

Went with the Procharger serp kit.

Thanks everybody for the help

Thanks Frank

http://thedugan.net/images/HPIM2077.JPG

[thedugan]

My WaterPump pulley is smooth. My paperwork lists it as a 6RIB smooth

I'm confused, shouldn't it have grooves to match the belt?
Sorry for the bad picture
http://thedugan.net/images/HPIM2079.JPG

[69Bbird]

The back side of the belt (smooth side) should ride on the pulley.

[HILROD]

I don't know what is included with your kit, but make sure you have a reverse rotation water pump with that pulley.

[thedugan]

Ah that makes sense. Thanks 69Bbird

HilRod - yes not sure which one yet. The procharger book lists a NAPA Part Number to use but I'm going to go with the Edelbrock.