Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 18 of 18

    Threaded View

    1. #1
      Join Date
      Jun 2005
      Location
      Raleigh, NC
      Posts
      466

      Rustoleum vs. POR-15 on subframe

      OK, most of you know I'm building this Camaro through donations and powdercoating jobs, so money is a real object here for this build.

      Anyway, The POR-15 Depot had offered to donate some POR-15 to the project, but I can't get a hold of them anymore and the stuff is EXPENSIVE!

      I am a big fan of Rustoleum and have used it in the past and it seemed pretty tough. Would you guys think this would be ok to use for the car? The front subframe is on the rotisserie right now, so I want to strip and paint it in the next few weeks. I know I stripped and painted my 86 S-10 Blazer's frame with semi-gloss Rustoleum about 10 years ago and it is still holding up, except for a few spots where I dragged it over rocks 4-wheeling. And that was only one coat.

      I was thinking of thinning out the Rustoleum a little with mineral spirits and laying it on with a brush so it would lay out smooth, then putting a few more coats on in the same manner until I have a smooth and thick coat.

      What do you guys think?






    Advertise on Pro-Touring.com