acid dipping

[Gordz32]

I wouldn't acid only for the reason that it removes paint in area that u will likely not get to or be able to repaint. For example inside rocker panels. Also the acid can get trapped in areas and come back to haunt u after painting. Media blasting is good to but the downsides are getting media into rocker panels and again areas that you won't get to that could get into paint. We had the chevelle media blasted and I spent a couple hrs blowing sand out of crevaces and I'm sure there still some in there. Also finding someone that knows what there doing is sometimes hard as well. The best and easiest and cheapest( If done yourself) is to just use aircraft stripper and when ur done wash( nuetralize) with water and then spray etch it and epoxy prime when ur done.