Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 16 of 16

    Thread: track truck

    Hybrid View

    1. #1
      Join Date
      Aug 2007
      Location
      Albemarle, NC
      Posts
      1,171
      Country Flag: United States

      track truck

      im think i may be dreaming, but it could be viable.
      take one late 80's s10 pickup, one LT1 smallblock, T56, and put together with a lot of engone setback. use a bunch of fiberglass on the front end, relocate the battery, fuel cell, and anything else i could to right about the tailgate for weight disctribution. four wheel discs that are rather large, 17 inch steel nascar wheels, 315/35/17 kuhmo slicks on all 4 corners. go tracking with my father and his vette buddies.

      i think i could actually do this pretty cheap except for the 6 speed. s10's in my area in beat farm truck condition are a dime a dozen, and pull-a-part has a few good looking LT1s in buicks and caprices. my concern is wether i would have to fab a front suspension completely different from the factory one, and what to do about the rear. also thinking the frame will need to be boxed and tied together laterally for stiffness, maybe with an x-brace, maybe a simple cage. but would it work on track, as well as street, or is my father right is saying "you cant track a truck"?
      had a dakota with the full hotchkis suspension, warmed over 5.2 and five speed that i did a few hot laps in at CMP, but i cooked the brakes, and it had massive understeer. but it was more fun than the vette i did a couple of days in, just because it was a handfull. thats what got me to thinking about this as a viable, cheap option. then i saw the GMC sonoma in the pictures section last night, and i couldnt sleep thinking about it.

      so, give me feedback, or call me a moron, whichever is closer to the truth.

      Michael

      Michael Crawford

      1970 plymouth Duster back under construction:
      https://www.pro-touring.com/showthre...uring-makeover

      1987 GMC S15 https://www.pro-touring.com/showthre...ct-drivabeater


    2. #2
      Join Date
      Sep 2006
      Location
      Southern Indiana
      Posts
      4,709
      Country Flag: United States
      Well as for me I wouldnt worry about massive set back , build a short bed version, dig up an 8.5 10 bolt from the later model s10/Blazer.
      As for bang for the buck a LT1 with the LT4 cam/head conversion and some tasty induction ideas (turbo/supercharger,etc.) and the 6 speed would run like stink.
      As for the front end just treat it like a Gbody, ATS spindles and give Markus a shout over at SC&C for his sweet upper control arms, for me I would also give air ride Technologies a call for some ShockWaves all the way around and as for the rearend I would swap in a Corvette IRS if you really want to get bang for the buck
      Or the ART 3 link DOES handle great with ShockWaves too (a friend had one, roadgrater setup, and he set it up for turning corners.
      As for lots of glass, think a set of fenders, lightweight hood and maybe a fiberglass bumper . If its gonna be a track truck a well setup cage to tie it together is nessasary.
      As for engine setback I would rather set it lower in the chassis.
      Also if the local yards have any look for a 6.0 LSx type engine, spend the cash on some AFR heads and then you can think later on maybe a Turbo setup (try www.STS.com) the remote turbo setups are SWEET!
      I got to drive an STS equipt Camaro WOW! He has since went with a modified setup and two and it is supposed to really haul.

    3. #3
      Join Date
      Apr 2002
      Posts
      777
      Country Flag: United States
      I've always thought a street version of the Craftsman trucks would be cool. Small block and manual trans of your choice, stock car based front suspension, 3 link out back with no worries about hacking up a floor with just a bed. What ever size tubs you want. Low ride. Drive anywhere, carry the spares with you right in back.

      --JMarsa

    4. #4
      Join Date
      Apr 2001
      Location
      Boston, MA
      Posts
      737
      Michael,

      Spend some time looking through some of the forum topics. You may come across this https://www.pro-touring.com/forum/sh...ad.php?t=10772
      ~Ryan

    5. #5
      Join Date
      Aug 2007
      Location
      Albemarle, NC
      Posts
      1,171
      Country Flag: United States
      that is the post that made me lose sleep. i spent about an hour looking at it and reading all the pages. thats the post that brought this whole sick idea back up again. im seriously considering it, now that ive almost got the duster finished and will have the time to devote to a track car. i really dont want another fox bodied mustang, miatas are too underpowered unless boosted, and vettes are too expensive and eat chassis and brake parts.

      what would you guys think about truck arms, coil spings, and the nascar ride height adjusters on all four corners? ive got muscle motorsports right up the road, and can get all sorts of old nascar stuff.

      michael
      Michael Crawford

      1970 plymouth Duster back under construction:
      https://www.pro-touring.com/showthre...uring-makeover

      1987 GMC S15 https://www.pro-touring.com/showthre...ct-drivabeater

    6. #6
      Join Date
      Sep 2007
      Location
      Fargo, ND
      Posts
      6
      Quote Originally Posted by dusterbd13
      what would you guys think about truck arms, coil spings, and the nascar ride height adjusters on all four corners? ive got muscle motorsports right up the road, and can get all sorts of old nascar stuff.

      michael
      I'm wondering the same thing. I was just reading a rear suspension article by Popular Hotrodding and they seemed to think they were 'decent'.

      -ron

    7. #7
      Join Date
      Dec 2004
      Posts
      124
      Not nearly the fab work or money as the syborg truck, but here's my start on it. Hopefully getting turbo'd over the winter.

      Id like to eventually recess the firewall and move the motor back 3-4" or better, but thats far off.

      http://www.cardomain.com/ride/2058627

    8. #8
      Join Date
      Aug 2006
      Location
      florida
      Posts
      330

      more truck

      I still have my first custom project sitting in my garage. its a 1990 isuzu p.u.its a full custom ,all the way oldschool minitruck complete with diamond tilt bed and all. But !!! thats about it as far as " normal minitrucks went. We built it more streetrod than minitruck.The interior is all tweed and billet. no plastic anywhere.vdo gauges, and get this no stereo at all!!!well a clarion head unit that was never hooked up. its got full polished stainless exhaust, jet hot coated header, weber carb, polished intake etc....if it came off or around the engine it was either painted ,remade out of billet, or chromed .We thought about giving it one last redo YEARS ago but decided we wanted to build a real car,anyone intrested let me know, it REALLY needs to go by-by!!!

    9. #9
      Join Date
      Aug 2004
      Location
      CHICAGO SUBURBS
      Posts
      761
      Engine setback is good! The V8 engine is set back 6-8 inches from the V-6 position in my S10. It is like a little gocart. It actually gets decent traction. Unlike any other V8 S10 I've ever seen. I did mine years ago befor there were any kits. Some day I'll re-do the chassis for more cornering power.

    10. #10
      Join Date
      Apr 2005
      Location
      Chicago
      Posts
      2,788
      Country Flag: United States
      Since your building a track truck you may want to look at Adam's truck

      http://www.highperformancetrucks.com...?g2_itemId=208

      It's pretty incredible. You also want to consider AWD as an option
      marty-mj
      GarageScene.net High Speed Welding KDHotrods RecoveryRoomInteriors WegnerAutomotive Autometer Ride-Tech

    11. #11
      Join Date
      Apr 2002
      Posts
      777
      Country Flag: United States
      That's what I'd like to do with the last gen of S-10's or the new V8 Canyon.

      --JMarsa

    12. #12
      Join Date
      Apr 2005
      Location
      Los Angeles
      Posts
      352
      Maybe go for a ZR2 baby Blazer. They had a wider track and frame and beefier suspension. I've seen one around here with ZR1 wheels on it. 17x9.5 front 17x11 rear.

      or an el camino
      -Tas
      '04 Mustang Saleen sc281 speedster
      '67 Mustang notchback: The fabled $500 non running project car: 308, auto, 2 barrel (now 4), AC(now removed), 5 lug, disk front, drum rear, power brakes and steering... that I got started and home for $65 :D

    13. #13
      Join Date
      Aug 2007
      Location
      Albemarle, NC
      Posts
      1,171
      Country Flag: United States
      i havent really decided yet if im going to do this, but needless to say ive been watching the secondhand news and craigslist for the right truck or a 2 door neon to turn into my track car. but for now, all i can do is plot and plan. gotta get the house first.

      Michael
      Michael Crawford

      1970 plymouth Duster back under construction:
      https://www.pro-touring.com/showthre...uring-makeover

      1987 GMC S15 https://www.pro-touring.com/showthre...ct-drivabeater

    14. #14
      Join Date
      Aug 2007
      Location
      Albemarle, NC
      Posts
      1,171
      Country Flag: United States
      got the truck last night. 1988 S15. 2.8 auto, power everything. pretty decent shape,m too. been driving it all over.

      the first stop will be a brake upgrade as the current stuff is absolutely shot. i dont even think i can save the caliper pins.
      ive seen somewhere that guys are modifying the stock spindles to accept C5 corvette calipers and 13 inch rotors to them. anyone know where i can find the info i need? i tried googling it, and searching, but apparently im not bright enough to figure out the proper query. also, ive heard a bunch of different things about rear disc swaps. anyone know what is a readily availible junkyard swap that i wont have to do anything too custom with? id really like to just pull the axles, swap the brake assemblies, and replumb it. gotta have emergency brakes, though.
      lastly, any thoughts on a master cylender or prop valve setup?

      thanks. sorry to bring up the old post, but i figured i wouldnt clutter the board with a new one.

      Michael
      Michael Crawford

      1970 plymouth Duster back under construction:
      https://www.pro-touring.com/showthre...uring-makeover

      1987 GMC S15 https://www.pro-touring.com/showthre...ct-drivabeater

    15. #15
      Join Date
      Dec 2004
      Posts
      124
      Being an 88, you should have the newer style axle flange on the rear. You can look for a rear disc set up from a 98+ blazer, LT or LS1 Fbody as well. Ebrake is gonna need some work since nothings gonna be a direct bolt on.

      Theres a few guys that make brackets and cut down hubs to fit late model vette stuff on a stock s10 spindle.
      94 S-10 / V8 / 6 speed / 8.5 rear / ATS spindles / QA1 coilovers / 14"C6Z brakes

    16. #16
      Join Date
      Aug 2004
      Location
      Laramie, WY
      Posts
      296
      Well in the late 80s they did have road racing for mini trucks.

      Tim
      89 Lincoln Towncar pro touring project ( new info found for handling)

      95 Explorer XLT OFF-Roader
      95 Chevy Suburban LT 4X4
      07 Harley XL1200L Low 08 Harley XL1200N nightster

      Would you vote for someone who doesn't stand up for the flag?




    Advertise on Pro-Touring.com