DC Control problem

[69 panel]

I have no idea how to get in touch with Brian Baskin at DC Controls about this problem and from what I've read it would be a waste of my time to try. So I thought I would post my problem here and maybe he'll read it and offer a solution or perhaps someone else has had this problem before.

I walked into my garage this morning and heard what sounded like a grunting noise. I walked around looking for where the noise was coming from and discovered that my Mark VIII fan was trying to start up...then stop...then start up...then stop. I haven't driven the vehicle in maybe three weeks. It's as though the DC Control unit is trying to start the fan and then immediately shutting off like current is bleeding on then off. I just unplugged one of the leads to the fan. I let it sit for an hour or so then plugged it back up and heard a click in the DC unit. I started to walk away thinking something maybe reset inside the unit and all was well...NO, in a moment it started doing it again.

I'm sure it's internal and there is no way of fixing it short of replacing the unit.
Here's your opportunity to make a liar out of me and send me a functioning unit for free. You and I both know that's not going to happen...is it Brian baskin?

So I will be ordering an Spal unit from G-Machines soon and enjoying smashing my DC Controls unit with a three pound hammer and talking bad about you to anyone who will listen if you don't make this right Brian. Are you there Brian?