Results 1 to 4 of 4
Thread: Front suspension
-
07-30-2007 #1
Registered User
- Join Date
- Jul 2007
- Posts
- 3
Front suspension
I am a new member. I reallly enjoy this website and reading all of the forums. I am in the process of planning a racecar inspired, pro touring, Cuda. I was wondering if anyone had experience with designing front suspension from scratch, not using a mustang or corvette suspension for a model? I am planning on building a custom frame for this project and wanted to try to build a very nice custom suspension package for it. Thanks for your time.
-
07-31-2007 #2
Registered User
- Join Date
- Oct 2004
- Location
- little falls minnesota
- Posts
- 226
Welcome aboard.
Do a whole lot of searches here and you will get more info than you can digest for quite some time.
There are also a good number of books out there that will give you all the stuff you need to atleast get started.
Doug
07-31-2007 #3
Registered User
- Join Date
- Jul 2007
- Posts
- 3
I have experience with dirt late model suspension geometry and I have a two year degree in mechanical engineering technology. I was just wanting some ideas like roll center hieght and camber gains I should shoot for. also may need someone that has a front suspension analizing program to run some numbers for me. I dont have one yet.
07-31-2007 #4
Registered User
- Join Date
- Jul 2007
- Posts
- 3
Also does anyone know of a reasonably priced suspension analizing program that works with windows vista home basic?
Reply With Quote
