Results 1 to 4 of 4
Thread: Tie Rod question
-
07-24-2007 #1
New to Pro-Touring
- Join Date
- Dec 2006
- Location
- Fillmore, California
- Posts
- 39
Tie Rod question
I have a 73 Nova that I have added the ATS AFX spindles to and am using the 69 Camaro Z28 short tie rod arms on. The rims I have are lightly contacting the rim inner surface. I ordered up the Baer trackers but given the size of the they actually make the problem worse. Before I look into a little more narrow of a front wheel I wanted to see if there are any other tie rod or tie rod arm options out there that might sort me out.
Jake
-
07-24-2007 #2
Registered User
- Join Date
- Dec 2005
- Location
- TuoCo, CA
- Posts
- 992
I think someone else here used a washer to shim the steering arm away from the rim.
Steve
'68 Camaro - SBC, TKO600, 3.73 Moser 12-bolt, Speedtech, ATS-AFX, Hotchkis, Forgeline, Ron Davis and C5 brakes (Kore3), Holley Terminator TBI.
Check it Out Here
07-24-2007 #3
New to Pro-Touring
- Join Date
- Dec 2006
- Location
- Fillmore, California
- Posts
- 39
I saw that and it is one option I am looking at. Although I would rather have the arm bolted directly to the spindle. At least that would be my number 1 choice. But spacing it away is also on the table.
Jake
07-24-2007 #4
Registered User
- Join Date
- May 2002
- Location
- Northern California
- Posts
- 10,716
Jake, what size rim are you running? Spacing the rim outward an option?
MrQuick ΜΟΛ'ΩΝ ΛΑΒ'Ε
Reply With Quote
