Tubing Benders.

[GBodyGMachine]

I have to do all the brake lines for my car and am looking for a Good bender. I need to be able to do 180 degree bends 3/8" and 1/4" stainless line. Who sells a good one?

JEff

[CamaroAJ]

snap-on and cornwell tools have one for $50 that does both 3/8 and 1/4 180* bends.

[MonzaRacer]

Got to your local hardware store, Look for the cheap tool table. I got a sweet tubing bender for $10 and it does 180 degree bends.
I have used the crap out of it and the one I got off the tool truck (snapon) will only do 90deg bends.
I have to go to local hardware this week I can look for a few of these if anyone is interested.
Lee

[parsonsj]

The best tubing benders are by Rigid. Go on ebay and you'll find some for sale.
jp

[CamaroAJ]

http://store.summitracing.com/partde...5&autoview=sku

[70 Chevelle]

I have the one camaro aj sent you a link to only I bought mine through matco tools. it will bend a full 180 with no kinks , nice piece.

[Karch]

You probably need 3/16" and 1/4". 3/8" is awfully big (huge) for a brake line.

[CarlC]

Imperial also makes good benders.

I would be nice to have a roller instead of a sliding shoe. It makes the bend a bit nicer but they are pretty expensive. I bought my Imperials for about $80 each.

[NOVA]

Gates has one too, good quality not the cheapest tho.

[wick]

I have used a few benders over the years but Rigid is by far the best. Like parsonsj said, get one of those.

[GBodyGMachine]

I just bought some of the rigid benders. I love them.

Jeff

[parsonsj]

Glad to hear it. Good luck with your bends.

jp

[MonzaRacer]

3/8s lines for brakes? ,,hhhmmmm must be some Terex brakes installed there.

[GBodyGMachine]

Typo, 3/16

Jeff