Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 16 of 16
    1. #1
      Join Date
      Sep 2004
      Location
      Santa Barbara, Ca
      Posts
      1,174

      My blower is here!

      After almost 5 months of waiting and frustrating phone calls to both Street & Performance and Magnacharger, my blower is here. It is an intercooled MP122H Magnacharger, and is larger than the more common MP112's that are on most of the Magnacharged cars I've seen.

      I installed my 90mm Holley LS2 throttle body and shot some pics. BTW, this blower is going on the modified LS1/6 that is in my '67 Camaro. I can't wait to get it installed and on the dyno. I'll be sure to give some updates as I install it.

      Andy



    2. #2
      Join Date
      Jan 2006
      Location
      McKinney, TX
      Posts
      1,623
      Country Flag: United States
      Sweet...
      66 Mustang "Project: Ballin on a budget"
      89 Mustang "Box Wine"

    3. #3
      Join Date
      May 2007
      Location
      Eugene Oregon
      Posts
      293
      Country Flag: United States
      killer get us some pics and #'s when you get it done
      DEMONIC OBSIDIAN
      1965 Chevelle lt1 gen v /T56 project.

    4. #4
      Join Date
      Feb 2006
      Location
      Southern California
      Posts
      660
      Country Flag: United States
      Hey Andy,

      looking good. What are your expected numbers? take pictures along the way during your install. Looks like a fun project.

      Do they make this for an LS2? What mods do you have to do to the motor or do you just bolt this in and away you go? Do you have to run low compression heads or can you use stock heads?


      Ron

      "If at first you don't succeed Skydiving is not for you"

      1970 Z28
      Scott Mock C6 Subframe, Ridetech RJoint 4 link
      LSX454
      Anvil Auto - through the build

    5. #5
      Join Date
      Aug 2004
      Location
      Burnaby, BC, Canada
      Posts
      1,388
      Lookin good Andy, that looks like a nice pile of $$$ sitting there. Keep us posted!
      1969 CAMARO RS

      2002 LS1-T56 Dyno results: 452 rwhp, 425 rwtq
      Project pics of my '69
      Lateral-G Feature Page
      Camaro Performers Magazine Feature

    6. #6
      Join Date
      Sep 2004
      Location
      Santa Barbara, Ca
      Posts
      1,174
      Quote Originally Posted by formula98
      Hey Andy,

      looking good. What are your expected numbers? take pictures along the way during your install. Looks like a fun project.

      Do they make this for an LS2? What mods do you have to do to the motor or do you just bolt this in and away you go? Do you have to run low compression heads or can you use stock heads?

      Thanks Ron, it should be a ton of fun.

      I'm expecting 525-550 rwhp and at least 500 rwtq when it's done. Maybe more depending where the boost ends up. There aren't too many guys running these bigger 122 blowers yet, but the results I have seen have been very good. This isn't a blower that is going to make huge peak numbers on the dyno, but a TON of usable torque and power under the curve.


      The kit I got is actually based on an LS2 GTO system. It uses the 4 bolt LS2 style throttle body (I got a manual 90mm Holley) and will bolt onto any LS1/LS2/LS6 head & motor. They can make a kit to work with whatever belt setup you are using (vette. f-body/GTO or truck).

      It can be bolted onto a stock motor (which is what Magnacharger's production kits are made for), but I wanted to change up some stuff. I changed my LS6 heads to a set of CNC'd Patriot LQ9 heads to drop the compression to 9.8:1 or so. It was not required, but it should allow me to run more timing/boost, or give me an extra safety margin for pump gas.

      I think on a stock LS2, you can bolt one on and get away with 5-6 psi. Magnuson claims 20 rwhp per pound of boost, so that's still a healthy gain.

      Andy

    7. #7
      Join Date
      Aug 2004
      Location
      absecon, new jersey
      Posts
      405
      Country Flag: United States
      Im jealous,i want one so bad for my ls1,but the wife wants a new dining room and island in the kitchen,so next year now.Very nice.
      73 corvette chop top silver LS6 motor ,LS6 intake,700r4,2400 pro torque convertor ,3.70 gears,modified hooker sidepipes to fit LS1,17 x9.5 boyd starburst,nitto 275/50/17-255/50/17 tires,vb&p suspension,nitrous,L-88 headlights,autometer guages.L88 hood,flares,spreader bar,vb&p sway bars

    8. #8
      Join Date
      Feb 2006
      Location
      SoCal
      Posts
      1,622
      Looks like your going to need some bigger fuel rails!!!!

      John
      '66 Chevy II - The "NEW" '69 Camaro!

      ***Under Construction***

      Build Update Link:

      https://www.pro-touring.com/forum/sh...ad.php?t=17108

    9. #9
      Join Date
      Aug 2004
      Location
      El Dorado Hills, CA
      Posts
      789
      Country Flag: United States
      Oh baby!!!!! Looks like fun!!
      Brad
      68 Camaro - Procharged LQ4 coming - Currie 9" narrowed, bagged, lays frame, BMW projector HID's LED tails, 18"s, lexus center console, seat warmers, A/C... Mini-tubbing in progress!!

      07 BMW 750li -loaded

    10. #10
      Join Date
      Dec 2006
      Location
      Eastern NC
      Posts
      173
      That would look really good sitting on the top of 'our' Trailblazer SS !!! I can't wait to see some numbers!

    11. #11
      Join Date
      Aug 2004
      Location
      Dunwoody, GA
      Posts
      4,983
      Country Flag: United States
      Glad to see that the blower came in finally, Andy.
      Trey

      "The early bird may get the worm, but the second mouse gets the cheese."
      ~ Jon Hammond

      1979 WS6 Trans Am stock LT1/T56 drive train out of my Formula. BMW M-parallel rims. C5/C6 brakes

      build thread https://www.pro-touring.com/showthre...ghlight=begins

    12. #12
      Join Date
      Oct 2004
      Location
      Macon, Ga.
      Posts
      8,085
      Country Flag: United States
      Great choice. I love the one of the gto. You will love the way it WAKES up your car.
      Bill

      Trailers are for BOATS!

    13. #13
      Join Date
      Sep 2004
      Location
      Santa Barbara, Ca
      Posts
      1,174
      Thanks for the compliments, guys. I'm sure it's going to turn my car into a monster, which is exactly what I want. I've always wanted a blower for one of my projects, so I'm really excited about this. It should look amazing under the hood of the '67.


      Andy

    14. #14
      Join Date
      Feb 2006
      Location
      Southern California
      Posts
      660
      Country Flag: United States
      Quote Originally Posted by streetk14
      Thanks Ron, it should be a ton of fun.

      I'm expecting 525-550 rwhp and at least 500 rwtq when it's done. Maybe more depending where the boost ends up. There aren't too many guys running these bigger 122 blowers yet, but the results I have seen have been very good. This isn't a blower that is going to make huge peak numbers on the dyno, but a TON of usable torque and power under the curve.


      The kit I got is actually based on an LS2 GTO system. It uses the 4 bolt LS2 style throttle body (I got a manual 90mm Holley) and will bolt onto any LS1/LS2/LS6 head & motor. They can make a kit to work with whatever belt setup you are using (vette. f-body/GTO or truck).

      It can be bolted onto a stock motor (which is what Magnacharger's production kits are made for), but I wanted to change up some stuff. I changed my LS6 heads to a set of CNC'd Patriot LQ9 heads to drop the compression to 9.8:1 or so. It was not required, but it should allow me to run more timing/boost, or give me an extra safety margin for pump gas.

      I think on a stock LS2, you can bolt one on and get away with 5-6 psi. Magnuson claims 20 rwhp per pound of boost, so that's still a healthy gain.

      Andy
      Thanks Andy,

      I'm real envious of your car and your progress. Mine will be another year of so and hopefully I can save enough for one of these blowers. I'll keep an eye on your project. Keep the great posts coming.


      Ron

      "If at first you don't succeed Skydiving is not for you"

      1970 Z28
      Scott Mock C6 Subframe, Ridetech RJoint 4 link
      LSX454
      Anvil Auto - through the build

    15. #15
      Join Date
      Jul 2007
      Location
      CarCal
      Posts
      35
      Holy Crap !!
      "Great" addition to the Dining Room Table !
      I should have picked a "CHEAPER" Hobby !!

    16. #16
      Join Date
      Nov 2005
      Location
      Farmington Hills, MI
      Posts
      1,038
      I love installing magnachargers. I do alot of Mustangs and we always prefer a Magnacharger. They are very efficient as well, great choice.

      Jeff
      JEFF SHORTT
      -IDEAL STEEL





    Advertise on Pro-Touring.com