Shaved Drip Rails..

[DLinson]

Vintage Glass will add a 1 inch boarder of ceramic coating to the inside of the glass so the urethane adhesive will stick to the glass. They will also add a small rubber edge molding similar to that on an S-10 window. This will cover up the gap between the window and the body.

I am using the factory size glass. I added material to the entire opening to close it up so there is a 1/4" gap between the body and the glass. I also created a shelf for the glass to sit on. I made it about 1/8 inch deaper than the thickness of the glass to allow for the urethane adhesive.

I'll have to try again on the pics. If I figure it out, I'll post them here again.

DLinson folder in Pro-touring FTP site

This link will get you my folder on the FTP site with the latest body pics. If you copy the links for the images in the posting above and past them to the adress bar it will take you to those photos on in the folder. I don't know why they don't work.



[IMG]ftp://anon:[email protected]/2004-08-09/dlinson/primer-driprail-3.jpg[/IMG]

Later,
Dennis