Project FNQUIK

[Motown 454]

My buddy Spaceman and I started the cable hood latch conversion (He did all the welding and a lot of the figuring) and got the top part of the latch in place and are lining the bottom up to find the final location. We'll set and mount it.
Here's the starting location.







Test fitting the plate



First mark up



First actual test fit.



I tried to clearance the holes on the radiator side to move the plate to the drivers side but it threw off the front piece that bolts to the header panel. Thank god for finish washers. Luckily I stopped before needing them.

Thanks 1967LS2