Results 1 to 10 of 10
Thread: Nelson Racing engines
Threaded View
-
06-26-2007 #3
Registered User
- Join Date
- Feb 2007
- Posts
- 164
A long block is going to set you back in the region of $15+k intake another $400. then if you go carb a CSU 850 is another $900. Frank does about the best deal I could find on Prochargers and believe me I looked everywhere! Call him for a price but anywhere from 5k to 7k depending on just how silly you want to get with a big block. If your going turbos probably add another 10k for those + plumbing. Headers, ignition, cooling then a drivetrain to handle all this power. By the time you get to the flex plate you have to realisticly be thinking $25 - 30k if you want reliable power in the 1000hp+ mark.
Yea I know everyone has a story of a $300.oo junkyard engine built up with spare parts running 8's and making 1200hp but leave them for the bar. Thats where they belong. Shove in enough boost or nitrous and most engines will live long enough to produce a dyno sheet but not many can do it time and time again. Not unless reliability has been invested in from the start.
-





Reply With Quote



