BAER 12" rear kit

[protour_chevelle]

So i have the track kit I believe. The 12" single piston PBR's on the rear. I can't find the information if these will bolt up to a 12 bolt? They are mounted on a 72 10 bolt right now and I plan on putting a 68 12 bolt in.

Also, what is the replacement pad for those single piston PBR calipers? I want to say 2002 Camaro?

[Goatman]

I don't think there is a difference between the two rears as far as mounting goes.... All the kits I've seen say 10/12 bolt.

[protour_chevelle]

yea thats what I was thinking too. Now to figure out the brake pad deal.

[Goatman]

Give Joe at Engineered Velocity a shout.... He's been helping me out plenty.


[email protected]

[Chevy]

So i have the track kit I believe. The 12" single piston PBR's on the rear. I can't find the information if these will bolt up to a 12 bolt? They are mounted on a 72 10 bolt right now and I plan on putting a 68 12 bolt in.

Also, what is the replacement pad for those single piston PBR calipers? I want to say 2002 Camaro?

Chevelle, i have them on 12 bolt (also 68) and work great. One thing to watch for is the instructions tell you that the axle flange must be machined down--even though when you fit it the stock size seem to fit fine. I called them and they said even though it seems to fit i'll have major problems is not machined down. They will do it for you free (minus your shipping). I machined mine down myself. Can't remember the exact dimension but as i recall i had to take about 0.100" off the diameter.