Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 14 of 14
    1. #1
      Join Date
      Mar 2005
      Location
      florida
      Posts
      181

      where to mount ecm?

      looking for a place to mt ecm close enough to run stock length harness.thought about mounting under dash behind glove box but not sure if future vintage air unit will fit in there with it.any advise would be much appreciated.



    2. #2
      Join Date
      Aug 2004
      Location
      Dunwoody, GA
      Posts
      4,983
      Country Flag: United States
      Need to know what car you're talking about and which harness as they are different lengths. I would think the Fbody harness would be the longest or the vette. Most aftermarket harnesses are some random set length not really modeled after a stock production length. So you may want to call whoever you were considering and ask them how long the harness is. They may be able to make you one that's got a longer trunk on it.
      Trey

      "The early bird may get the worm, but the second mouse gets the cheese."
      ~ Jon Hammond

      1979 WS6 Trans Am stock LT1/T56 drive train out of my Formula. BMW M-parallel rims. C5/C6 brakes

      build thread https://www.pro-touring.com/showthre...ghlight=begins

    3. #3
      Join Date
      Mar 2005
      Location
      florida
      Posts
      181
      car is 69 camaro.cant decide if I will have custom harness built or have stock one modified?

    4. #4
      Join Date
      Aug 2004
      Location
      Dunwoody, GA
      Posts
      4,983
      Country Flag: United States
      I don't know of any place willing to modify a factory harness. If you've got some friends that are good with electronics(I don't mean just cutting and crimping either) try and modify the factory one. It's time consuming, not hard.

      As for mounting locations, I can't say specifically on a first gen where to put it. Just use your imagination. Keep such things as wire routing and access to the PCM in mind. Also keep in mind what kind of elements it will be exposed to in the location you're thinking of. Yes, the unit is sealed weather tight but I'm not gonna put one in the wheel well so the wheel can sling mud, rocks, and water all over it. It's just wires running to it, so you're free to put it almost anywhere.
      Trey

      "The early bird may get the worm, but the second mouse gets the cheese."
      ~ Jon Hammond

      1979 WS6 Trans Am stock LT1/T56 drive train out of my Formula. BMW M-parallel rims. C5/C6 brakes

      build thread https://www.pro-touring.com/showthre...ghlight=begins

    5. #5
      Join Date
      Dec 2004
      Location
      Morehead City, NC
      Posts
      929
      Country Flag: United States
      John at www.speartech.com does re-wire factory harnesses to your specified needs. He can also reprogram the ECM for you. He did one for me and made the ECM harness long enough to move it under the dash. This was done at approx. half the cost of a new harness.
      Mike Holleman

    6. #6
      Join Date
      Apr 2007
      Location
      Chicoish Ca
      Posts
      45
      Check on LS1.com. This guy had the same questions you did, but he

      has a 67: http://ls1tech.com/forums/showthread.php?t=684612

      I am putting mine on the wheel well on my 1970 LS1 El Camino. Wires on the stock F-Body harness are too short to put anywhere else..

    7. #7
      Join Date
      Apr 2006
      Posts
      617
      Country Flag: United States
      I cut mine into the fire wall and used a stock 99 Camaro Harness. I modified the wheel well so I could service as needed. I also used a universal Vintage Air system to fit under my dash. Good luck with your project. Their are many ways this can be done. Randy
      Please see my PT Garage for more info on ProBell Camaro. 67 style,99 comfort, options and drive-ability with NASCAR Late Model suspension front and rear.https://www.pro-touring.com/forum/vb...?do=view&g=106
      ------------------------------------------------------------------------------------------------
      Car Domain PG
      http://www.cardomain.com/ride/2565383

    8. #8
      Join Date
      Aug 2004
      Location
      Dunwoody, GA
      Posts
      4,983
      Country Flag: United States
      Quote Originally Posted by Mike Holleman
      John at www.speartech.com does re-wire factory harnesses to your specified needs. He can also reprogram the ECM for you. He did one for me and made the ECM harness long enough to move it under the dash. This was done at approx. half the cost of a new harness.
      Mike Holleman
      That's good info. I'm glad I was wrong.
      Trey

      "The early bird may get the worm, but the second mouse gets the cheese."
      ~ Jon Hammond

      1979 WS6 Trans Am stock LT1/T56 drive train out of my Formula. BMW M-parallel rims. C5/C6 brakes

      build thread https://www.pro-touring.com/showthre...ghlight=begins

    9. #9
      Join Date
      Jun 2006
      Location
      TX
      Posts
      177
      I have 2 small mounting tabs welded to the wheel well, just just bolts to remove it.


    10. #10
      Join Date
      Sep 2004
      Location
      Santa Barbara, Ca
      Posts
      1,174
      Quote Originally Posted by Mark Smith
      looking for a place to mt ecm close enough to run stock length harness.thought about mounting under dash behind glove box but not sure if future vintage air unit will fit in there with it.any advise would be much appreciated.


      My '67 has the ECM mounted in the passenger footwell area. There is a carpeted board that was made that covers the ECM, wiring and relays. The board flips up and I have easy access to it when needed. It is completely hidden, and is in a nice, dry area. The drawback is that the front passenger loses a little leg room. Not a big deal, IMO. My car has a Street & Performance engine harness, and the engine wiring is very well hidden as you can see. Hope this gives you some ideas.

      Andy

    11. #11
      Join Date
      Apr 2003
      Location
      Nyköping, Sweden
      Posts
      292
      Country Flag: Sweden
      I mounted mine on the inside of the firewall above the footpad to preserve legroom. I drilled/cut a hole just where the firewall gets vertical, sligtly behind (or next to) the pass side cyl. head. This made it possible to use the stock harness as I do without lengthening any cables.

      The relays I placed in the glovebox.

      The ECM is now sandwiched between the firewall and the AC unit.

      Jan
      Jan Suhr
      Nyköping, Sweden
      1969 Pro touring Camaro Z/28 LS1/T56
      Scandinavian Pro Touring Forum protouring.se

    12. #12
      Join Date
      Aug 2004
      Posts
      83

      s-10 bracket for ECM

      I used a newly built harness from Speartech. They were helpful long after the sale. I used a bracket/tray from an S-10 pickup to mount the ECM. I bought it new at the Chevy dealer. The ECM (from a 2000 Camaro) snapped into the bracket perfectly. The bracket is mounted under the dash just above the gas pedal.

    13. #13
      Join Date
      Jan 2005
      Location
      Houston, TX
      Posts
      143
      I have a 1969 with a Vintage Air system (GenII Compac)(DSE bracket). It is tight, but mine is mounted behind the glove box with the A/C
      Phillip Lawrence
      1969 Camaro
      LS2 with a Kenne Bell

    14. #14
      Join Date
      Aug 2004
      Location
      Burnaby, BC, Canada
      Posts
      1,388
      Here is a pic showing my PCM mounting under the dash. It's mounted behind the glovebox. You'll need to drill a 2" hole in the firewall to get the connectors through.

      Edit: I am running a stock modified harness from John at www.speartech.com
      Attached Images Attached Images  
      1969 CAMARO RS

      2002 LS1-T56 Dyno results: 452 rwhp, 425 rwtq
      Project pics of my '69
      Lateral-G Feature Page
      Camaro Performers Magazine Feature




    Advertise on Pro-Touring.com