Results 1 to 5 of 5
Thread: Which intake?
-
05-26-2007 #1
New to Pro-Touring
- Join Date
- Jan 2007
- Posts
- 54
Which intake?
I am puting a 427 into a 67 camaro. I know I will have clearence problems with the hood so I am going with a low rise intake. My 427 is basicly stock with a 280 magnum cam and demon 750. I am more interested in low to mid range then (6000 tops) high range. I have oval port heads. What intake should I use?
TorkerII or the performer or any other suggetions.
-
05-26-2007 #2
Banned
- Join Date
- Feb 2007
- Location
- East Freetown, MA
- Posts
- 513
If they make an air gap for the BB's, then that's what I would use. If not a Performer or Performer RPM...
05-26-2007 #3
Registered User
- Join Date
- Sep 2002
- Location
- San Jose, CA
- Posts
- 1,793
The Edelbrock torker is the shortest intake you can get
1971 Camaro, 383 stroker ~500HP,M21 Trans with lightened flywheel. All Sorts of Auto-x Goodness in the Suspension. 12" Brakes ->SOLD
But ask me about my 2004 STi Auto-x car...
Just call me Brett
05-27-2007 #4
Registered User
- Join Date
- Feb 2007
- Posts
- 164
Torquer II is old tech. Go with a performer RPM IMO.
05-27-2007 #5
Registered User
- Join Date
- Sep 2002
- Location
- San Jose, CA
- Posts
- 1,793
If it'll fit the RPM is a better intake no doubt...
1971 Camaro, 383 stroker ~500HP,M21 Trans with lightened flywheel. All Sorts of Auto-x Goodness in the Suspension. 12" Brakes ->SOLD
But ask me about my 2004 STi Auto-x car...
Just call me Brett
Reply With Quote
