Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 9 of 9

    Threaded View

    1. #4
      Join Date
      Aug 2004
      Location
      SoCal
      Posts
      133
      Thanks for the replies.

      I took pics of the rotors and sent them to Baer. Rick from Baer called me to discuss and said that wear looked correct for the miles on the rotors and stressed the rotor seasoning process. He said pressures seem correct but that I could get a pressure tester from Autozone to verify line pressure. Rick said the appearant increased wear on the rear rotors could be due to the e-brake dragging on the rotors. Rick said that the brakes would perform much differently after about 1,000 miles.

      I'm confident that the lines are clear of air as we bled the system several times and the brake pedal is hard. Rick said a spongey pedal would be a symptom of that. I also asked about glazed pads and he said with the compounds they use that isn't really an issue anymore. (Plus, what are the chances of bad pads on bothe sides of the front and not the rear?)

      Basically Rick said to put more miles on the brakes and season the rotors per their instructions. We'll see...



      Thanks again for the input.

      Rich
      1965 GTO - 439ci Pontiac ,66 Tripower induction, M-20, Full GW suspension, 3:1 PS, manual Baer 13"/12" disks, 18" AR TT2 "Classics"
      2005 GTO - chrome lugs and valve caps...





    Advertise on Pro-Touring.com