Results 1 to 4 of 4
-
05-22-2007 #1
Registered User
- Join Date
- Feb 2007
- Location
- Southwest Arkansas
- Posts
- 25
67 CHEVELLE rear spring question Help Please
I recently purchased a set of eibach springs for my 67 chevelle the new springs are pigtailed on one end but not on the other. The old factory springs were pig tail on both ends. I think the spring cup up top will hold the unpigtailed spring. Have any of you guys ran into this. Please help
I double checked the part # on the eibach site I supposedly have the right ones????
Clayton, C. David
67 Chevelle/Malibu
Poser-Touring
-
05-23-2007 #2
Registered User
- Join Date
- Mar 2005
- Location
- Loganville, GA
- Posts
- 931
The upper spring seat will accept the non-pigtailed end (64-66 style rear spring), I have it that way on mine, fits with no problems so far. I haven't driven it yet since the body is off the frame, but the spring fits in the seat quite nicely.
2018 Cruze LT Hatchback
2003 Suburban 2500 8.1L
1975 MGB Roadster
2003 GSX750F Katana
05-23-2007 #3
Registered User
- Join Date
- Nov 2006
- Location
- Hazlehurst, MS
- Posts
- 61
I had the same issue on my 70. The original's were pigtailed on both ends, but the new ones were not. The open end fits nicely on the top seat. I have been running them this way for about a year with no problems at all.
05-23-2007 #4
Registered User
- Join Date
- Feb 2007
- Location
- Southwest Arkansas
- Posts
- 25
Thanks Guys
Ya'll put my mind at ease. Thanks Again
Clayton, C. David
67 Chevelle/Malibu
Poser-Touring
Reply With Quote
