Results 1 to 4 of 4
-
05-26-2007 #1
Registered User
- Join Date
- Dec 2005
- Location
- TuoCo, CA
- Posts
- 992
Front Suspension Project Underway...
Today I finally had the time and enough parts to get underway with the installation of:
- Speedtech UCAs
- Speedtech LCAs
- Hotchkis Coils and Swaybar
- ATS "AFX" Tall Spindles.
As soon as my Forgeline ZX3Ps (18.9.5" in gunmetal) arrive I'll finish up with C5 brakes. So far I'm very pleased with the results... I forgot to take ride height measurements in advance, but I think I got somewhere between 2-3" drop. Once I get tires and wheels on it should be awesome.
Before shot...
http://s34.photobucket.com/albums/d1...t=IMG_0176.jpg
And after...
The difference between 72 A-body and C5 rotors is hardly noticable to the naked eye... yeah right...
before....
and after...
Last edited by eville; 05-26-2007 at 09:06 PM.
Steve
'68 Camaro - SBC, TKO600, 3.73 Moser 12-bolt, Speedtech, ATS-AFX, Hotchkis, Forgeline, Ron Davis and C5 brakes (Kore3), Holley Terminator TBI.
Check it Out Here
-
05-27-2007 #2
Registered User
- Join Date
- May 2007
- Location
- Houston, Tx
- Posts
- 2,200
looks awsome...good work
Colin Russ
05-27-2007 #3
Registered User
- Join Date
- Feb 2006
- Location
- Southern California
- Posts
- 660
Nice! Keep the updates coming. What's out back are you going with C5 in the rear also?
Ron
"If at first you don't succeed Skydiving is not for you"1970 Z28
Scott Mock C6 Subframe, Ridetech RJoint 4 link
LSX454
Anvil Auto - through the build
05-27-2007 #4
Registered User
- Join Date
- Dec 2005
- Location
- TuoCo, CA
- Posts
- 992
Running Wilwoods in the rear now...
http://i34.photobucket.com/albums/d1...t/IMG_0972.jpgSteve
'68 Camaro - SBC, TKO600, 3.73 Moser 12-bolt, Speedtech, ATS-AFX, Hotchkis, Forgeline, Ron Davis and C5 brakes (Kore3), Holley Terminator TBI.
Check it Out Here
Reply With Quote
