Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 30

    Hybrid View

    1. #1
      Join Date
      May 2005
      Location
      Fontana, CA
      Posts
      4,960
      Country Flag: United States
      To answer
      #1: Yes, in the rear the thickness of the hat v. the drum will be the deciding factor.
      #2: The spindles are the same other than the upper bracket boss. The Disc version is thicker than the drum. THis only affects caliper bracket mounting, not rotor.
      #3: All the different kits use different types of hubs. This is where there can be no concensus. Some may increase tw while others decrease and some keep it relatively the same. As you say, < +-0.125" won't make much difference at all unless you are shoving 9.5"+ wide 17-18" rims up front and wanting it to work the best.

      Nick R.
      69 Camaro - 383, 700R4, 12 bolt 3.55, Hotchkis, Bilstein, Global West, Morris Classic
      08 HHR SS - Still Stock for now
      Do you still believe in all the things that you stood by before? Are you out there on the front lines, or at home keeping score?
      Do you care to be the layer of the bricks that seal your fate? Would you rather be the architect of what we might create?


    2. #2
      Join Date
      Aug 2004
      Location
      Rockford, MN
      Posts
      278
      Quote Originally Posted by 6'9"Witha69
      To answer
      #1: Yes, in the rear the thickness of the hat v. the drum will be the deciding factor.
      #2: The spindles are the same other than the upper bracket boss. The Disc version is thicker than the drum. THis only affects caliper bracket mounting, not rotor.
      #3: All the different kits use different types of hubs. This is where there can be no concensus. Some may increase tw while others decrease and some keep it relatively the same. As you say, < +-0.125" won't make much difference at all unless you are shoving 9.5"+ wide 17-18" rims up front and wanting it to work the best.
      Thank you, that is the type of info I was looking for. I knew about the upper boss being different, but wasn't sure if the bearing mounting flange was inboard/outboard relative to a drum spindle. I'm primarily looking at kits that re-use the drum hub (most C4/C5 conversion kits). If I understand correctly, if I re-use my drum hub and spindle, the only difference will be in the thickness of the hat vs drum on the front as well?

      Sorry if my original question wasn't clear to all, I'll try to phrase them more specifically....I guess I figured the general info was applicable to most situations.

      Beefy, I'm not trying to be confrontational, but your questioning my abilities didn't exactly come off as being very helpful. The car is listed in my sig....I assumed that people would make that deduction, it's a 1969 Pontiac Firebird.


      1969 Firebird, Black, Parchment Arizen interior, Poncho 383 (4" crank), Kauffman heads, TKO600, Moser 12 bolt, Wilwoods, DSE, Speed Tech, Koni, Hotchkis, GW, 18" TTI's, VA Gen IV, etc.




    Advertise on Pro-Touring.com