Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 17 of 17

    Hybrid View

    1. #1
      Join Date
      Aug 2005
      Location
      Hamilton, NJ
      Posts
      4,319
      Country Flag: United States
      I just wired mine this past weekend. I made a bracket to hold it in the RF fender of my 77Z, behind the battery. I hope to start the car tonight or tomorrow and find out how well it works. I did jump the blue lead and the fans spun at half speed, so that is good.

      I wish the thing was offered in a more watertight box – those jumper pins are too exposed, IMO. And the crimp on connectors, ugh. I cut the plastic off them and soldered them, and replaced a few. Other then that, so far so good. As long as it works, those are minor complaints.



      I thought about putting a fusible link on the output line from the controller to the fans to protect the controller more. But I figure links burn so slow that the damage would already be done, so I just used the one on the feed side. I may go back and add an in-line circuit breaker to give the controller more protection. That is how I wired my 1st electric fan in my 82 T/A a long time ago. A GM power window breaker, the ones that look like metal blade fuses, in a blade fuse holder.
      Scott from NJ.

      Vent Windows Forever! ...

      Feather-light suspension, Konis just couldn't hold
      I'm so glad I took a look inside your showroom doors


    2. #2
      Join Date
      Mar 2005
      Posts
      52
      ok...guess i'll have to wait....kind of got the same information over at nastyz28 forum also...thanks for the information




    Advertise on Pro-Touring.com