Need speaker enclosure help

[Morgan]

I am installing Boston Acoustics SX series components in my car, I have the tweeters mounted on the A-pillars but don't have anywhere to mount the mid-range. I want them on the doors, toward the front but can't set them into the door as there just isn't enough room. Anyone out there who makes or can make a raised enclosure at an angle for the speaker to fit into that I can mount to the surface of the door?

Any help is much appreciated as this car is going on the Power Tour in 20 days.

[Gordz32]

you can make them easily out of MDF, just get the thickness you need for spacing the speaker out, cut and design it do ur likeing and cut it out. If you don't have alot of woodworking tools, go down to homedepot and get a dremel, and also pick up a rotozip cutting bit. Draw ur pattern out on the MDF and cut, when your done with that. U can srew it to the door make sure it fits good, and then cover it with spray addhesive and your material of choice carpet/etc.

[Morgan]

Thanks for the advice. I'll head to Home Depot and see what I can come up with.