Results 1 to 20 of 32
Thread: Engine Help
Hybrid View
-
05-17-2007 #1
Registered User
- Join Date
- Apr 2001
- Location
- Rockford Illinois
- Posts
- 3,949
Yes Cloyes is a good brand and 18degrees is way too much for a chain and is probably worn a nice line in your timing cover. I had one once that wore a line that started to leak before it decide to jump time. This is a common problem.
-
05-17-2007 #2
Registered User
- Join Date
- May 2005
- Location
- Rolla, MO
- Posts
- 304
I'll find out this weekend as I the timign set will be in tomorrow and I hope to have some time here and there to tear into it.
I believe the set I ordered as three settings for 4 deg advance, straight up, and 4 deg retarded. What does everyone recommend to set it at.
I was thinking the 4 deg advanced might be a good idea. I have 6x heads with a 068 cam and I think it is a little low on compression and cylinder pressure. I have always had to run a lot of initial advance on the combo and think that the 4 deg would help.
Reply With Quote
