Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 5 of 5
    1. #1
      Join Date
      Dec 2004
      Location
      NYC
      Posts
      553
      Country Flag: United States

      Need Help with upper and lower control arms

      I ran into a problem after installing wilwood disc brakes,tires are hitting fender on turns,will upper and lower tubular control arms work if i purchase a set to move them in?reason i`m asking is cause they look shorter than the stock ones,this is on a `70 Camaro.


      Thanks

      George
      `67 Buick GS 400 Hdtp,494ci Stage 2 BBB,5-speed TKO-600,"The Black Widow"


    2. #2
      Join Date
      Mar 2005
      Location
      westchester county new york
      Posts
      2,995
      It depends on the brand,but dont sacrifice handling to avoid changing offsets. Is it drastic rubbibg, oris the tire just kissing a flat part of the well?

    3. #3
      Join Date
      Aug 2004
      Location
      Pittsburgh, PA
      Posts
      316
      George,

      The tire is probably kissing the back of the wheelwell. There are a few things thta contribute to this.

      from the factory, the original wheels were not centered in the well. When you add aftermarket arms (presumably with more caster) it makes the situation worse. Also, Ill bet the Wilwoods pushed the hub width out a little which contributes also.

      The easiest cure would be to add some backspacing to the front wheels. Easier said than done though.

      Shane

    4. #4
      Join Date
      Sep 2004
      Location
      PA.
      Posts
      935
      Country Flag: United States
      George, since you haven`t made any other changes it sounds like Shane hit it on the head with the Wilwoods increasing the track width a bit. How much back spacing do your wheels have? What alignment specs are you running? What size wheel/tire combo. Shorter control arms (as in street rod style shorter uppers and lowers) may solve your clearance issue but won`t do any good for the suspension geometry. It makes all of the suspension curves more pronounced and the "sweet spot" of the suspension smaller. More - camber may take care of it if you`re not running much now. You may or may not be able to get away with that with stock upper A arms. More aggressive - camber gain (SC Stage 1 package) would also help,by pulling the tire away from the outter fender lip during cornering or in bump. Mark SC&C

    5. #5
      Join Date
      Dec 2004
      Location
      NYC
      Posts
      553
      Country Flag: United States
      the willwood pushed the tires out and they rub on the fenders on tturns whene i had the stock brakes same size tire and rim no rubbing thanks for the replys
      George
      `67 Buick GS 400 Hdtp,494ci Stage 2 BBB,5-speed TKO-600,"The Black Widow"




    Advertise on Pro-Touring.com