Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 3 of 3

    Hybrid View

    1. #1
      Join Date
      Dec 2004
      Location
      North Jersey
      Posts
      983

      Anyone Ever Install Their Own Sump Pump?

      Hey all,
      My house _never_ gets water, but with the 6+ inches of rain we got over the last two days, I've been sucking water out from under the subfloor in my finished basement with a ShopVac. Anyone ever do their own sump pump? How hard was it? I have a fair amount of experience working around the house, and my father-in-law is an old-school brick/tile/masonry expert from Italy. Think we could tackle this job?

      Steve Ragusa - North Jersey
      2006 Infiniti G35x
      Former Build - 1988 Monte Carlo SS - ZZ4-cammed TPI 355, F-body serpentine conversion, World-Class 5-speed, Eibachs/Bilsteins, Howe tall LBJs, 34mm hollow front swaybar, 3/4" straight rear bar, 17" Coys C55s, 12" front discs, and more. Sold on 2/28/11.


    2. #2
      Join Date
      Feb 2005
      Posts
      320
      If you already have the pit in the floor for one the job is a pice of cake. All you need is the pump a check valve and some pipe. Usually from what i've seen the pipe is 1 and a half pvc. Pick up a length of that along with some pvc prime and pvc glue and maybe a couple of 90 's and 45's. The pump will be the most expensive part of the project. good luck chris

    3. #3
      Join Date
      Aug 2001
      Location
      Connecticut
      Posts
      1,572
      Country Flag: United States
      piece of cake if your foundation has a hole setup for one. If not, I would not break through the floor yet- there may be a lot of water under it that would come in - best to do any concrete work once it dries back out in a few weeks.

      I'm happily dry so far-- but just down the road there was a house with water up to the bay window this morning- and a flooded out farm. Tough stuff- I hope they had flood insurance.
      1968 Camaro RS/SS, LS7 with Katech mods, T56 Magnum, C6Z06 Brakes
      1968 Camaro RS Convertible LS3/480hp/4L70E
      1962 Corvette 327-340hp stock
      1963 Corvette Split Window Coupe
      1967 Corvette L79 convertible
      2006 Corvette Z06
      2011 Corvette GS convertible



    Advertise on Pro-Touring.com