Results 1 to 4 of 4
Thread: OEM swaybars.
-
04-11-2007 #1
Registered User
- Join Date
- Oct 2004
- Location
- little falls minnesota
- Posts
- 226
OEM swaybars.
For all you that spend time under alot of different rigs.
I'm looking for a stock style front sway bar with a eye to eye spread of around 43.75" or so.
If it come's off anything that someone may make a performance version of, I'm interested.
If you happen to see something like this could you throw a Stanely at it and pass back some basic dimensions and maybe a application.
Something in the 1.25" range for diameter would be great.
Any help would be greatly appreciated.
Thank you, Doug
-
04-15-2007 #2
Registered User
- Join Date
- Jul 2006
- Location
- Northwestern NJ
- Posts
- 342
What chassis is it for? 1 1/4" is an awful big bar. I'm running an 1 1/8" with an iron headed BBC in an 80 Malibu.
Tommy
Tommy Souren
"The older I get, the faster I was."
Grandma's 20k mile '80 Malibu Classic, in-progress factory style LS6 454, Legend LGT 700 5 speed, 9" 3.70 posi, Global West suspension, 12"/11" discs.
04-15-2007 #3
Registered User
- Join Date
- Sep 2006
- Location
- Southern Indiana
- Posts
- 4,709
My thoughts exactly. I am thinking of installing a 1 1/4 3/4 tone sway bar on my 78C10 with air ride. thats awful big for a car.
04-15-2007 #4
-Moderator-
- Join Date
- Apr 2001
- Location
- Central CA USA
- Posts
- 6,114
FYI first and second gen Camaros are 46.5" but a second gen could be bent inward to fit I'll bet. The arms wing out near the ends. A second gen bar has much longer arms than first gen so is larger, also the third gen F bodies are probably the same and the late 80's IROC and TA have hollow versions!!!
David Pozzi http://www.pozziracing.com67 Camaro RS that will be faster than anything Mary owns.
Reply With Quote
