Results 1 to 12 of 12
-
12-13-2004 #1
New to Pro-Touring
- Join Date
- Dec 2004
- Location
- Arlington, Tx
- Posts
- 25
67 camaro with C4 Corvette Suspension
I just picked up my car it's a 67 camaro I am wanting to use c4 corvette front suspension has anyone done this ? I know to use the rear suspension with the dana 44 but any other suggestions ?
-
12-13-2004 #2
Pro-Touring Veteran
- Join Date
- Jun 2002
- Location
- Long Island, NY
- Posts
- 11,320
Wayne Due makes a subframe to accept C4 components, it's a really nice piece. His new subframe uses C5 components, but there is a bit more mod work involved.
www.waynedue.com
12-13-2004 #3
New to Pro-Touring
- Join Date
- Dec 2004
- Location
- Arlington, Tx
- Posts
- 25
Man they are asking alot of dough for there setups.
12-14-2004 #4
Pro-Touring Veteran
- Join Date
- Jun 2002
- Location
- Long Island, NY
- Posts
- 11,320
I'm not sure what prices you looked at, but I know if you hunt around for the C4 stuff yourself, and just buy the bare WD subframe, it's cheaper.
12-14-2004 #5
New to Pro-Touring
- Join Date
- Dec 2004
- Location
- Arlington, Tx
- Posts
- 25
How much is the bare subframe from them ?
12-14-2004 #6
Pro-Touring Veteran
- Join Date
- Jun 2002
- Location
- Long Island, NY
- Posts
- 11,320
I'm not 100% sure so I don't want to give bad info. Hopefully someone else will know, I'm sure someone here has purchased a bare frame from Wayne?
12-14-2004 #7
Registered User
- Join Date
- Dec 2004
- Posts
- 16
I think the bare frame is $2400 for the C-4 , not bad if you have ever seen one. I've seen people try to copy it but none of succeeded (sp) IMO.
04-21-2008 #8
New to Pro-Touring
- Join Date
- Apr 2008
- Posts
- 2
I know this is an old thread, but I tried to click on the link to find the info and it dosent seem to work, Does anyone know where I can find the before mentioned subrame?
04-21-2008 #9
Registered User
- Join Date
- Nov 2006
- Location
- Mountain Springs, Texas
- Posts
- 4,824
Wayne Due is no longer in business. Check Art Morrison or 21st Century if you want a subframe that uses C5 components. I think Jakes Hot Rod Shop also has a new subframe that uses C5 components.
Don
04-21-2008 #10
Registered User
- Join Date
- Jan 2002
- Location
- Italy
- Posts
- 746
I think I saw a subframe and even a dana 44 for sale just a few days ago, cannot remember if it was here or on lat g.
Have Fun!
André
2009 Chrysler 300C Touring.
3.0 liter V6 diesel, five speed auto, black with light grey leather.
1968 Chevelle Coupe.
355cid, Viper T56, Corvette C4 IRS (Dana 44) and Corvette C4 IFS with Porsche 6piston Brembo's.
1980 Chevy Van (shortie G10).
355cid, TH350, 8.5" 10bolt posi and Belltech spindles.
2000 BMW 540i Wagon. (FOR SALE €7K)
4.4 liter V8, six speed manual, lowered and with Bilstein B8's, silver with black leather.
2001 Ford Focus Wagon.
1.8 liter turbo diesel, and a whoppin 90HP.:bsjerk:
1968 Benelli Motorella
foldable 50c scooter to go in a car trunk.
2x '90s Yamaha TZR 2stroke bikes.
one 125cc one cylinder and one will be 350cc two cylinder.
04-21-2008 #11
New to Pro-Touring
- Join Date
- Apr 2008
- Posts
- 2
I'm actually putting a full C4 suspension under a 68 Camaro. I already have all the donor stuff from the C4 but I don't have the frame to get the reference dimensions from to fabricate the sub frames I'll need (may just make a whole tube chassis) I'm also planing on upgrading the breaks from C4 to C5 ZO6, I'm told its possible without too much work.
04-21-2008 #12
Registered User
- Join Date
- May 2002
- Location
- Northern California
- Posts
- 10,716
MrQuick ΜΟΛ'ΩΝ ΛΑΒ'Ε
Reply With Quote
