Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 4 of 4
    1. #1
      Join Date
      Nov 2004
      Location
      dayton ohio
      Posts
      166
      Country Flag: United States

      need to change backspace

      i've got some new vintage wheel works wheels and unfortunately i need to increase the backspace. vintage wheel works wont do it. anyone know of a place that will cut the weld holding the center to the rim and reweld it? its either that or shorten the axles and tubes. i need about 3/4". my fault but i cant see ordering 2 new rims.



    2. #2
      Join Date
      Nov 2005
      Location
      Auburn, WA
      Posts
      1,359
      Geez, I would think shortening the axles and housing would be cheaper and easier...
      Matt Jones
      Mechanical Engineer
      Art Morrison Enterprises

    3. #3
      Join Date
      Aug 2004
      Location
      CHICAGO SUBURBS
      Posts
      761
      Yes shortening the rear, or selling them and getting others would be cheaper. There are a few places that can do it, but its around 200.00 a wheel.

    4. #4
      Join Date
      Jul 2006
      Location
      San Diego, CA
      Posts
      599
      Quote Originally Posted by HILROD
      Yes shortening the rear, or selling them and getting others would be cheaper. There are a few places that can do it, but its around 200.00 a wheel.
      I'll agree with HILROD. We occassionally rehoop our wheels when customers bend a hoop. It's not a cheap process.




    Advertise on Pro-Touring.com