Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 3 of 3

    Thread: Wheel strength

    1. #1
      Join Date
      Feb 2007
      Posts
      38

      Wheel strength

      Hello all:

      I am thinking of going to a larger aftermarket wheel and lower profile tires for my '75 Formula and was wondering about wheel strength.

      The roads around here are not good with lots of waves in the asphault and pot holes from the winter freeze/thaw.

      Should I stick with a steel wheel in this situation, or are other materials strong enough for these road conditions?

      Thanks, Rick



    2. #2
      Join Date
      Aug 2001
      Location
      Connecticut
      Posts
      1,572
      Country Flag: United States
      Each mfg is different; if you see a rim (i.e. some weld, centerline) that say "not for road racing or autocross", that puts up a red flag to me on strength; some rims are forged - my preference; or some of the multi-piece rims are good too. Ask the maker if the rims if they are ok for road course or rally use- that will tell a lot. (one of the reasons I picked ROH)

      pot-holes... Just stay away from the rubber band look, 17's, even 18's seem to live fine on the street. (watch the curbs though!)
      1968 Camaro RS/SS, LS7 with Katech mods, T56 Magnum, C6Z06 Brakes
      1968 Camaro RS Convertible LS3/480hp/4L70E
      1962 Corvette 327-340hp stock
      1963 Corvette Split Window Coupe
      1967 Corvette L79 convertible
      2006 Corvette Z06
      2011 Corvette GS convertible


    3. #3
      Join Date
      Feb 2007
      Posts
      38
      68sixspeed, that is good info to look for the "not for road racing or autocross" message. I will look for that or ask if I don't see it.

      Thanks, Rick


    Advertise on Pro-Touring.com