Cheap Tricks

[Midwest Performance]

I haven't posted in a long while so I thought I would start a thread of cheap ideas.
I'll start with and idea I came up with when I was at my dad's changing oil in a motorcycle. The fill hole was in a hard to get at place and he did not have a adequate funnel at hand. So in a time of need and impatience I came up with this.
Take a gallon or a 1/2 gallon milk jug and cut as drawn out in the picture. You can make one out of about any jug with a molded in handle.

Another trick when installing allen bolts take a piece of paper and push the allen wrench through the paper into the bolt and if done correctly it will hold the bolt on the wrench while getting the bolt started. I use this to get bolts started in confined spaces.

Hope these can help some one out. If you have a slick or cheap idea post them up.


Kevin

[homerneedspeed]

nice toe