Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 1 of 2 1 2 LastLast
    Results 1 to 20 of 29
    1. #1
      Join Date
      Jan 2006
      Location
      Florida
      Posts
      260
      Country Flag: United States

      LSX 427...which Intake and TB?

      I am building an iron blocked 427 for my 70 chevelle project. The next step to the build is to decide on an intake and TB setup. I have considered both the Fast Setup and also the vic jr with carb style tb. Any suggestions or opinions are welcome.



    2. #2
      Join Date
      Feb 2007
      Location
      East Freetown, MA
      Posts
      513
      Ported FAST 90 is the only way to go...

    3. #3
      Join Date
      Oct 2004
      Location
      Charlotte, NC
      Posts
      795

      do a little reading over at

      www.ls1tech.com great site for ls motors. I would go with a fast 90mm and a Nick Williams 90 mm throttle body. There are some sheet metal intakes out there as well...and of course there is the Harrop individual runner intake.

    4. #4
      Join Date
      Jan 2007
      Location
      Fort Worth, TX
      Posts
      115
      I would say the Vic JR and 1000 cfm 4 brrl TB

      Intake link
      http://www.edelbrock.com/automotive_...b_vic-jr.shtml
      TB link
      http://www.edelbrock.com/automotive_...niversal.shtml

      I think this combo just looks SICK!!!




      Mustang Status
      Current Status ChemoTherapy for the Cancer (Rust)...
      All My Mustang Progess Pics

    5. #5
      Join Date
      Aug 2004
      Location
      Dunwoody, GA
      Posts
      4,983
      Country Flag: United States
      I have no idea how well that Edelbrock peice will work, but staying with a more factory approach means using a FAST 90mm intake and 90mm TB. At this point I would have the TB ported as well.
      Trey

      "The early bird may get the worm, but the second mouse gets the cheese."
      ~ Jon Hammond

      1979 WS6 Trans Am stock LT1/T56 drive train out of my Formula. BMW M-parallel rims. C5/C6 brakes

      build thread https://www.pro-touring.com/showthre...ghlight=begins

    6. #6
      Join Date
      Jan 2007
      Location
      Fort Worth, TX
      Posts
      115
      Quote Originally Posted by WS6
      I have no idea how well that Edelbrock peice will work, but staying with a more factory approach means using a FAST 90mm intake and 90mm TB. At this point I would have the TB ported as well.
      Links from other site. Granted this is on a full size pickup, so it weighs a little more...

      Video
      http://video.performancetrucks.net/v...be017322b7.htm

      Build up threads
      http://www.performancetrucks.net/for...d.php?t=383344

      http://www.performancetrucks.net/for...d.php?t=382466
      Mustang Status
      Current Status ChemoTherapy for the Cancer (Rust)...
      All My Mustang Progess Pics

    7. #7
      Join Date
      Nov 2004
      Location
      dayton ohio
      Posts
      166
      Country Flag: United States
      it all depends on what you want to spend. fast 90 1200. carb style 1000. indiv runner harrop/kinsler style 3500

    8. #8
      Join Date
      Jun 2001
      Location
      Orlando, FL
      Posts
      10,604
      Country Flag: United States
      The boys at Wegner (who developed the GMPP carb-style piece) show horsepower gains over the LS6 manifold using a carb and a carb-style TB like the Holley or FAST.

      http://www.wegnermotorsports.com

      jp
      ​John Parsons

      UnRivaled Rides -- Modern upgrades for your ride.

      UnRivaled Rides recent project -- LS9-powered 69 Camaro

    9. #9
      Join Date
      Aug 2004
      Location
      Dunwoody, GA
      Posts
      4,983
      Country Flag: United States
      Just saw that TPiS now offers a sheet metal intake for the LS1/6/7 engines, not the 2. I guess it's a TB issue. Anyway this thing is supposed to be badass. Might want to check it out. It looks great.
      Trey

      "The early bird may get the worm, but the second mouse gets the cheese."
      ~ Jon Hammond

      1979 WS6 Trans Am stock LT1/T56 drive train out of my Formula. BMW M-parallel rims. C5/C6 brakes

      build thread https://www.pro-touring.com/showthre...ghlight=begins

    10. #10
      Join Date
      Feb 2005
      Posts
      198
      I just ordered a intake that flows more than a ported FAST and is adaptable to future configurations if desire to change up. PM me for pics and flow results if you are interested.

      Mal

    11. #11
      Join Date
      Feb 2007
      Location
      East Freetown, MA
      Posts
      513
      Yeah, at what RPM range?

    12. #12
      Join Date
      Sep 2006
      Posts
      37
      Why dont u go LS7 heads and intake,setup should start right at 550hp

    13. #13
      Join Date
      Jan 2006
      Location
      Florida
      Posts
      260
      Country Flag: United States
      Id love to go with a sheet metal intake but spending over 2500 for just the intake is a little steep for me.

    14. #14
      Join Date
      Feb 2005
      Posts
      198
      Quote Originally Posted by Goatman
      Yeah, at what RPM range?
      Goatman,

      No RPM range. It was tested on a flowbench like a cylinder head. If you want a copy and pics, send me your e-mail addy.

      Mal

    15. #15
      Join Date
      Feb 2007
      Location
      East Freetown, MA
      Posts
      513
      Ok........ What lift(s)?

    16. #16
      Join Date
      Dec 2006
      Location
      California
      Posts
      1,368
      Country Flag: United States
      Quote Originally Posted by 4OfaKind
      Goatman,

      No RPM range. It was tested on a flowbench like a cylinder head. If you want a copy and pics, send me your e-mail addy.

      Mal
      Post here for all, please? Is it a secret?

      Matt

    17. #17
      Join Date
      Nov 2005
      Posts
      155
      Yeah, i want to see that too!

      Dub Silverado, give Mizfit a call, their Sheetmetal intake is more affordable at about 1800$ and very nice.

      Lead.
      LEADFOOT1
      1969 Camaro Pro-Touring project SOLD!!!

      NOW; as of 08-2006. Still a 1969 Camaro, BUT now a Convertible!, A 63 000 miles, 1 owner, 1 repaint in '78 that was stored inside from 1982 'till i got it car, and is now; Full custom tubbed to fit 19x8.5 and 20x13" Forgeline ZX3p wheels, w/345'-25-20's rear, C6-Z-06 brakes.
      AirBAr suspended +++

      1998 Dualie Crew Cab 3500/454 Fully Loaded.

    18. #18
      Join Date
      Feb 2007
      Location
      East Freetown, MA
      Posts
      513
      Sheetmetal intake = strictly drag race part.

    19. #19
      Join Date
      Feb 2005
      Posts
      198
      Quote Originally Posted by DarkoNova
      Post here for all, please? Is it a secret?

      Matt
      No, No secret just can't show names and prices in fairness to other sponsors. Checked it and there are no names on the flowtest. If you want pics, send me an e-mail addy.

      Mal
      Attached Images Attached Images  

    20. #20
      Join Date
      Feb 2005
      Posts
      198
      Wow, almost 40cfm more of flow @ .600 lift and no comments from observers?
      Oh well, it is a cool intake and I can't wait until mine arrives.

      Mal

    Page 1 of 2 1 2 LastLast



    Advertise on Pro-Touring.com