Results 1 to 4 of 4
Thread: sitting high
-
03-09-2007 #1
Registered User
- Join Date
- Jun 2002
- Location
- Santa Clarita Cal,
- Posts
- 804
sitting high
Hi Guys
Just getting around to hanging front sheetmetal, I noticed front sits very high, im running a BB with QA1 coil overs and global west arms shocks are adjusted to just keep the coils from moving so it should be low, will these take a sag and lower the front, also i cant seem to bounce the front end much so it feels very stiff, with the delalum bushings I thought it would atleast move a bit.
What do you think.
Thakns
RSK68
Rick Klein
-
03-09-2007 #2
Banned
- Join Date
- Feb 2007
- Location
- East Freetown, MA
- Posts
- 513
Give it a couple of weeks with all the weight on it. The springs will settle...
03-09-2007 #3
Registered User
- Join Date
- Jan 2006
- Location
- Appleton,WI
- Posts
- 164
what springs did you use? I used the progressive rate ones they spec for a big block, because that is what I have in my S-10. Well it did not budge at all. With 2 230+ poungs guys jumping on the bumper it didn't move. Had to buy some different constant rate springs and now it rides and sits nice.
03-09-2007 #4
Registered User
- Join Date
- Jun 2002
- Location
- Santa Clarita Cal,
- Posts
- 804
sitting high
I have had these for 2 years maybe, im not sure if they are progressive or constant, i will check when i get home.
ThanksRSK68
Rick Klein
Reply With Quote
