Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 17 of 17

    Thread: octane argument

    1. #1
      Join Date
      Oct 2006
      Posts
      174

      octane argument

      a car will make the MOST power on the LOWEST octane it can run WITHOUT pinging/detonating

      true or false

      in other words, say a car runs perfectly fine with no detonation on 93, putting 118 alone with no other changes will NOT boost performance...

      correct?



    2. #2
      Join Date
      Feb 2005
      Posts
      320
      Based on what i learned along time ago yes that is correct. to see the benefits of the increased octane you would need to bump / advance the timing. chris

    3. #3
      Join Date
      Nov 2004
      Location
      Colorado
      Posts
      1,260
      Country Flag: United States
      The slower burn rate of the 118 gas might even hurt power.

      Advancing timing can go only so far, too much advance and the piston is working against the expanding fuel air charge no matter how controlled a burn it is.

    4. #4
      Join Date
      Oct 2006
      Posts
      174
      Quote Originally Posted by EFI69Cam
      The slower burn rate of the 118 gas might even hurt power.

      Advancing timing can go only so far, too much advance and the piston is working against the expanding fuel air charge no matter how controlled a burn it is.
      yeah, that's exactly what i'm saying

      without any other changes, going to higher octane is more likely to hurt power, probably not a whole lot, but a little bit

    5. #5
      Join Date
      Aug 2004
      Posts
      582
      Just so you know, octane and burn rate are not intrinsically linked. Some higher octane fuels burn slower, but some burn faster as well.

    6. #6
      Join Date
      Sep 2005
      Location
      So Cal
      Posts
      237
      if the engine is tuned for the octane then its all good. if you were to put in the 118 octane on a car that has a tune for 93 then yes it will hinder performance.

    7. #7
      Join Date
      Sep 2005
      Location
      So Cal
      Posts
      237
      if youre thinking about putting the 118 in the cobra engine it should do fine with a tune! i know guys that will only run race gas in their daily driver terminators!

    8. #8
      Join Date
      Nov 2004
      Location
      Colorado
      Posts
      1,260
      Country Flag: United States
      Quote Originally Posted by Fuelie Fan
      Just so you know, octane and burn rate are not intrinsically linked. Some higher octane fuels burn slower, but some burn faster as well.
      Strictly speaking this is true. It would take more research than I want to do to prove it conclusivly, but "octane" as its used now is not an indication of how much octane in in the fuel, but a measure of its resistance to pre-detonation. This resistance usually comes from a slower burn.

      What goes on inside a combustion chamber is so complex that it cannot be modeled accurately, chaos theory is the only mathematic model for it.

      I think for the sake of the original assertion that more "octane" than what is required to avoid detonation and ping is at best a waste, that octane and burn rate can be interchanged.

    9. #9
      Join Date
      May 2005
      Posts
      386
      Country Flag: United States
      GM tells us now that if your vehicle states to run 87 octane and you run a high octane fuel you will actually be emitting more pollutants, along with possible degraded performance, because the compression ratio along with the timing is not enough to fully burn the fuel within the combustion chambers

    10. #10
      Join Date
      Feb 2007
      Location
      usa
      Posts
      5
      I was told that certain motors such as the LS1 and others were capable of adjusting timing themselves "to a certain degree" based on the level of octane detected??? Is this true?

    11. #11
      Join Date
      Nov 2005
      Location
      Auburn, WA
      Posts
      1,359
      Quote Originally Posted by jbone
      I was told that certain motors such as the LS1 and others were capable of adjusting timing themselves "to a certain degree" based on the level of octane detected??? Is this true?
      The computer doesn't detect the octane, but will retard the timing based on a "hit" from the knock sensors. If it detects detonation (say from a lower octane fuel), it will retard the timing to eliminate it.
      Matt Jones
      Mechanical Engineer
      Art Morrison Enterprises

    12. #12
      Join Date
      Apr 2001
      Location
      Central CA USA
      Posts
      6,114
      Country Flag: United States
      I moved this thread to the Engine section. It's a better fit.
      David
      67 Camaro RS that will be faster than anything Mary owns.

    13. #13
      Join Date
      Feb 2007
      Location
      usa
      Posts
      5
      Quote Originally Posted by silver69camaro
      The computer doesn't detect the octane, but will retard the timing based on a "hit" from the knock sensors. If it detects detonation (say from a lower octane fuel), it will retard the timing to eliminate it.
      I over heard a conversation that "coil-on-plug" (or something like that) alowed the motor to recognize the type of fuel........So there is no such thing as any engine advancing timing for race fuel correct? .......again I have no idea about this stuff

    14. #14
      Join Date
      Jul 2006
      Location
      Northwestern NJ
      Posts
      342
      Almost all, if not all, OBDII engines will retard timing based on detonation sensors. AFAIK, none of them will "read" octane and increase timing. Multiple fuel engines somehow "ID" the fuel being used and adjust accordingly.

      Tommy


      Tommy Souren

      "The older I get, the faster I was."

      Grandma's 20k mile '80 Malibu Classic, in-progress factory style LS6 454, Legend LGT 700 5 speed, 9" 3.70 posi, Global West suspension, 12"/11" discs.

    15. #15
      Join Date
      Aug 2001
      Location
      Connecticut
      Posts
      1,571
      Country Flag: United States
      Give it a 'true' for most cases- on my old motor I lost 2-2.5mph at the dragstrip by changing from 93 octane to 100 octane, even with a 10:1 motor. I tried jetting down and still couldn't recover it. I know I didn 't get the a/f mixture optimal on the 100, but it sure didn't impress me.
      1968 Camaro RS/SS, LS7 with Katech mods, T56 Magnum, C6Z06 Brakes
      1968 Camaro RS Convertible LS3/480hp/4L70E
      1962 Corvette 327-340hp stock
      1963 Corvette Split Window Coupe
      1967 Corvette L79 convertible
      2006 Corvette Z06
      2011 Corvette GS convertible


    16. #16
      Join Date
      Aug 2004
      Location
      Celina, Texas
      Posts
      360
      All of this rings true BUT.. there was a magazine test a few years back that seemed to prove the exact opposite. I tried to write the with "WTF?" but never saw a response.

      They ran a pump motor on high octane and gained power. The magazine guys even seemed completely puzzled. It seems crazy, but it's the last time I saw any back-to-back test published and it contradicted everything I thought I knew of octane.

    17. #17
      Join Date
      Feb 2007
      Posts
      164
      All you will do is waste money on fuel you don't need. If your car needs 106 octane 110 may be a buffer but 116 will just be lost $$$.




    Advertise on Pro-Touring.com