Results 1 to 9 of 9
Thread: dart heads
-
03-06-2007 #1
Registered User
- Join Date
- Sep 2005
- Posts
- 321
dart heads
beside jegs and summit were can i buy dart heads for a good price. im looking to price out the pro 1 bare 215 heads.
thanks
-
03-06-2007 #2
Registered User
- Join Date
- Jul 2006
- Location
- Clinton, MS
- Posts
- 184
CNC-Motorsports.com has them for $942. pair bare w/angle,straight plug or 64-72 cc chambers. Call them they will deal with you. 1-800-341-1528.
03-06-2007 #3
Registered User
- Join Date
- Sep 2005
- Posts
- 321
thanks i will give them a call, the guy thats porting my heads said the darts would be the best choice for what im building.
anybody else run them and have input.
03-06-2007 #4
Registered User
- Join Date
- Feb 2007
- Posts
- 164
Scott Shafiroff. He does what looks like good deals on BBC heads. call to see if they can supply SBC ones. http://www.shafiroff.com/heads/heads.asp
03-07-2007 #5
Banned
- Join Date
- Aug 2003
- Location
- Orlando, FL
- Posts
- 8,745
I would love to sell you the heads, but to be honest, your better off going to Summit on this one. I have to tell ya, it makes Summit hard to beat with their $10 shipping on the order. $950 to the door is a pretty good deal. I could sell you the heads cheaper, but shipping would make up for the difference real quick at about $60 for the pair.
The built heads are a better deal. There is no way you can build them for what they sell them for. $1330 completewith roller springs, Whew!
03-07-2007 #6
Registered User
- Join Date
- Sep 2005
- Posts
- 321
thanks mr.frank i will keep that in mind. i trust the guy whos going to port them, ive seen what he could do with a pair of theses heads....
03-07-2007 #7
Banned
- Join Date
- Aug 2003
- Location
- Orlando, FL
- Posts
- 8,745
Just want you to get the best deal, even if it is through someone else.
03-07-2007 #8
Registered User
- Join Date
- Sep 2005
- Posts
- 321
heres a few pics of the port job, now this is someone elses heads.NOT MY HEADS
03-07-2007 #9
Registered User
- Join Date
- Jan 2007
- Posts
- 25
Those look real nice. The biggest problem with hand ported heads is that it is hard to keep them all symmetrical. You end up with slightly different flow #'s on the runners, and different chamber sizes. A good porter can get things real close, but there is nothing like the uniformity of some CNC'd heads. You can get the AFR 195 Eliminator's fully assembled for $1440. That comes with 1.24 OD Hyd Roller springs (that’s the LS1 style spring!!) which saves a ton of valve train weight.
We will be adding Dart heads and Blocks to our lineup very soon.
Reply With Quote
